Samsung Galaxy Tab Active2 T395UBSACTI1
SM-T395 8 countries Android 9 (Pie)

Samsung Galaxy Tab Active2 T395UBSACTI1 Firmware

Samsung Galaxy Tab Active2 T395UBSACTI1 is an Android 9 (Pie) firmware for 8 countries, 8 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T395XXS9CTI1: bootloader binary raised from 9 to A (10), so after installing it there is no way back to older builds. A newer build for SM-T395 is available: T395JXSECVA1.

Download firmware
8.9/10 (460)35,373 times
Android 9 (Pie)
OS Version
2020-10-20
Build Date
2020-09-01
Security patch
8
Countries
8
CSC codes
A (10)
Bootloader binary

Bootloader binary A (10). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab Active2 use bootloader binary E (14) (latest: T395JXSECVA1). If your device already runs binary E (14), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: T395XXSACTI3
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T395
    ARO Argentina
    		T395AROACTI1 2020-10-20 2020-10-20 2.395 GiB
    SM-T395_1_20201009221934_r837lmxuuj_fac.zip
    		Download
    SM-T395
    CHO Chile
    COO Colombia
    MXO Mexico
    PEO Peru
    +1 more country
    TPA Panama
    		T395UUBACTI1 2020-10-20 2020-10-20 2.362 GiB
    SM-T395_1_20201009221704_l4wuhar71b_fac.zip
    		Download
    SM-T395
    ECO Ecuador
    		T395ECOACTI1 2020-10-20 2020-10-20 2.781 GiB
    SM-T395_1_20201009222204_entlwuym5y_fac.zip
    		Download
    SM-T395
    ZTO Brazil
    		T395ZTOACTI1 2020-10-20 2020-10-20 2.35 GiB
    SM-T395_1_20201009221334_q4r1rxj3w5_fac.zip
    		Download

    No matching downloads

    How to flash T395UBSACTI1

    • T395UBSACTI1 has bootloader binary A (10). Your device must run binary A (10) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in T395UBSACTI1

    · Security patch update

    Rollout of T395UBSACTI1 by region

    Samsung released this build in all regions (8) on the same day, October 20, 2020.

    Device specifications

    • Launched withAndroid 7.1
    • Display diagonal20.3 cm (8")
    • Display resolution1280 x 800 pixels
    • Processor frequency1.6 GHz
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution5 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight419 g

    Frequently Asked Questions

    T395UBSACTI1 is Android 9 (Pie) firmware for Samsung Galaxy Tab Active2, released for 8 countries, 8 CSC codes. It includes the 2020-09-01 security patch. Samsung built it on 2020-10-20.

    No. A newer build for SM-T395 is available: T395JXSECVA1. Install it instead of T395UBSACTI1 unless you need this exact version. The previous build was T395XXS9CTI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab Active2 must be on bootloader binary A (10) or lower.

    This build uses bootloader binary A (10). It can be flashed on a Samsung Galaxy Tab Active2 running binary A (10) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 12 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab Active2

    • The security of your device has been improved.

    • Overall stability of functions improved.
    • The security of your device has been improved.

    • The security of your device has been improved.

    • The stability of NFC has been improved.
    • Updated application : Samsung Note
    • The security of your device has been improved.

    · Security patch update
    Show 7 older builds

    • The stability of NFC has been improved.
    • Updated application : Samsung Note
    • The security of your device has been improved.

    • The security of your device has been improved.

    · Security patch update

    • The security of your device has been improved.

    · Security patch update
    Model firmware by region