Samsung Galaxy Tab A T587PVPU3CTG5
SM-T587P 1 country Android 8.1.0 (Oreo)

Samsung Galaxy Tab A T587PVPU3CTG5 Firmware

Samsung Galaxy Tab A T587PVPU3CTG5 is an Android 8.1.0 (Oreo) firmware for United States (SPR, XAS). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T587PVPS2CSL1: bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds. This is the newest build for SM-T587P.

Download firmware
8.7/10 (485)8,590 times
Android 8.1.0 (Oreo)
OS Version
2020-07-27
Build Date
1
Countries
2
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T587PVPU3CTG5
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T587P
    SPR, XAS United States
    		T587PSPT3CTG5 2020-08-10 2.702 GiB
    SM-T587P_1_20200727170304_z9d7yq33dv_fac.zip
    		Download

    No matching downloads

    How to flash T587PVPU3CTG5

    • T587PVPU3CTG5 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T587PVPU3CTG5 by region

    Samsung released this build in all regions (2) on the same day, August 10, 2020.

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal25.6 cm (10.1")
    • Display resolution1920 x 1200 pixels
    • Processor frequency2 GHz
    • Processor familyQualcomm Snapdragon
    • Processor modelMSM8953
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight526 g

    Frequently Asked Questions

    T587PVPU3CTG5 is Android 8.1.0 (Oreo) firmware for Samsung Galaxy Tab A, released for United States (SPR, XAS). Samsung built it on 2020-07-27.

    Yes. T587PVPU3CTG5 is the newest build for SM-T587P on SamFirm. The previous build was T587PVPS2CSL1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.702 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab A running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 3.

    Other builds and changelog for Samsung Galaxy Tab A

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region