SM-T597V 1 country Android 9

Samsung Galaxy Tab A (10.5) T597VVRU2BSH4 Firmware

Name: Samsung Galaxy Tab A (10.5) (SM-T597V)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab A (10.5) T597VVRU2BSH4 is an Android 9 firmware for United States (VZW). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T597VVRS2ASG2 https://samfirm.shop/build/T597VVRS2ASG2: Android updated from Android 8.1.0 (Oreo) to Android 9. A newer build for SM-T597V is available: T597VVRU5CVE1 https://samfirm.shop/build/T597VVRU5CVE1.

8.7/10 (32)4,471 times

Android 9

OS Version

2019-08-26

First release

other regions until 2019-08-27

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A (10.5) use bootloader binary 5 (latest: T597VVRU5CVE1). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: T597VVRU2BSH4

Model	Region	CSC Version	Build Date	Release date	Size	File name	Download
SM-T597V	VZW United States	T597VVZW2BSH4	2019-08-27	2019-09-24	2.809 GiB	SM-T597V_1_20190827143001_bwc35usj77_fac.zip
SM-T597V	VZW United States	T597V2BSH4	2019-08-26	—	—	—

Device specifications

Launched withAndroid 7.0
Display diagonal26.7 cm (10.5")
Display resolution1920 x 1080 pixels
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution5 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight529 g

Specifications of SM-T597VZ, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash T597VVRU2BSH4

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T597VVRU2BSH4 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T597VVRU2BSH4 is Android 9 firmware for Samsung Galaxy Tab A (10.5), released for United States (VZW). Samsung built it on 2019-08-26.

No. A newer build for SM-T597V is available: T597VVRU5CVE1. Install it instead of T597VVRU2BSH4 unless you need this exact version. The previous build was T597VVRS2ASG2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.809 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A (10.5) must be on bootloader binary 2 or lower.

This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab A (10.5) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.