Samsung Galaxy Tab A (10.5) T597VVRS2ASG2
SM-T597V 1 country Android 8.1.0 (Oreo)

Samsung Galaxy Tab A (10.5) T597VVRS2ASG2 Firmware

Samsung Galaxy Tab A (10.5) T597VVRS2ASG2 is an Android 8.1.0 (Oreo) firmware for United States (VZW). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T597VVRS1ASE1: bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-T597V is available: T597VVRU5CVE1.

Download firmware
9.3/10 (31)4,352 times
Android 8.1.0 (Oreo)
OS Version
2019-07-25
First release
other regions until 2019-07-26
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A (10.5) use bootloader binary 5 (latest: T597VVRU5CVE1). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T597VVRS2ASG2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T597V
    VZW United States
    		T597VVZW2ASG2 2019-07-26 2019-08-16 2.774 GiB
    SM-T597V_1_20190726142740_9mnz1mx8qs_fac.zip
    		Download
    SM-T597V
    VZW United States
    		T597V2ASG2 2019-07-25 — — — Download

    No matching downloads

    How to flash T597VVRS2ASG2

    • T597VVRS2ASG2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 7.0
    • Display diagonal26.7 cm (10.5")
    • Display resolution1920 x 1080 pixels
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution5 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight529 g

    Specifications of SM-T597VZ, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T597VVRS2ASG2 is Android 8.1.0 (Oreo) firmware for Samsung Galaxy Tab A (10.5), released for United States (VZW). Samsung built it on 2019-07-25.

    No. A newer build for SM-T597V is available: T597VVRU5CVE1. Install it instead of T597VVRS2ASG2 unless you need this exact version. The previous build was T597VVRS1ASE1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.774 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A (10.5) must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab A (10.5) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A (10.5)

    No changelog details available.
    Model firmware by region