Samsung Galaxy Tab S2 9.7 T817JVU2BPE2
SM-T817 1 country Android 6.0.1 (Lollipop)

Samsung Galaxy Tab S2 9.7 T817JVU2BPE2 Firmware

Samsung Galaxy Tab S2 9.7 T817JVU2BPE2 is an Android 6.0.1 (Lollipop) firmware for Turkey (TUR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T817JVU2AOJ2: Android updated from Android 5.0.2 (Lollipop) to Android 6.0.1 (Lollipop). A newer build for SM-T817 is available: T817JVS2CTI1.

Download firmware
9.2/10 (463)8,739 times
Android 6.0.1 (Lollipop)
OS Version
2016-05-16
Build Date
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T817JVU2BPE2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T817
    TUR Turkey
    		T8172BPE2 — — — Download
    SM-T817
    TUR Turkey
    		T817TUR2BPE2 2016-06-01 1.639 GiB
    SM-T817_1_20180403111527_pq214f3y25_fac.zip
    		Download

    No matching downloads

    How to flash T817JVU2BPE2

    • T817JVU2BPE2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal24.6 cm (9.7")
    • Display resolution2048 x 1536 pixels
    • Display technologySuper AMOLED
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2.1 MP
    • Weight390 g

    Specifications of SM-T817T, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T817JVU2BPE2 is Android 6.0.1 (Lollipop) firmware for Samsung Galaxy Tab S2 9.7, released for Turkey (TUR). Samsung built it on 2016-05-16.

    No. A newer build for SM-T817 is available: T817JVS2CTI1. Install it instead of T817JVU2BPE2 unless you need this exact version. The previous build was T817JVU2AOJ2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.639 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab S2 9.7 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab S2 9.7 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab S2 9.7

    No changelog details available.
    Model firmware by region