Samsung Galaxy Tab S2 9.7 T817TUVS2BPL1
SM-T817T 1 country Android 6.0.1 (Lollipop)

Samsung Galaxy Tab S2 9.7 T817TUVS2BPL1 Firmware

Samsung Galaxy Tab S2 9.7 T817TUVS2BPL1 is an Android 6.0.1 (Lollipop) firmware for United States (TMB). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T817TUVU2BPF1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T817T is available: T817TUVU2BQE2.

Download firmware
9.3/10 (461)8,770 times
Android 6.0.1 (Lollipop)
OS Version
2016-12-09
Build Date
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T817TUVS2BPL1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T817T
    TMB United States
    		T817T2BPL1 — — — Download
    SM-T817T
    TMB United States
    		T817TTMB2BPL1 2017-01-23 1.608 GiB
    SM-T817T_1_20170605143940_2nf6im3h8o_fac.zip
    		Download

    No matching downloads

    How to flash T817TUVS2BPL1

    • T817TUVS2BPL1 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal24.6 cm (9.7")
    • Display resolution2048 x 1536 pixels
    • Display technologySuper AMOLED
    • Processor frequency1.9 GHz
    • Processor familySamsung Exynos
    • Processor model5433
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2.1 MP
    • Weight390 g

    Frequently Asked Questions

    T817TUVS2BPL1 is Android 6.0.1 (Lollipop) firmware for Samsung Galaxy Tab S2 9.7, released for United States (TMB). Samsung built it on 2016-12-09.

    No. A newer build for SM-T817T is available: T817TUVU2BQE2. Install it instead of T817TUVS2BPL1 unless you need this exact version. The previous build was T817TUVU2BPF1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.608 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab S2 9.7 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab S2 9.7 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab S2 9.7

    No changelog details available.
    Model firmware by region