Samsung Galaxy Tab S2 9.7 T817WVLU3BPK5
SM-T817W 1 country Android 6.0.1 (Lollipop)

Samsung Galaxy Tab S2 9.7 T817WVLU3BPK5 Firmware

Samsung Galaxy Tab S2 9.7 T817WVLU3BPK5 is an Android 6.0.1 (Lollipop) firmware for Canada (BMC, FMC, RWC, XAC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T817WVLU2BPF5: Android updated from Android 6.0.1 (Marshmallow) to Android 6.0.1 (Lollipop); bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds. A newer build for SM-T817W is available: T817WVLU3CQE4.

Download firmware
9.4/10 (459)17,326 times
Android 6.0.1 (Lollipop)
OS Version
2016-11-28
Build Date
1
Countries
4
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T817WVLU3BPK5
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T817W
    BMC, FMC, RWC, XAC Canada
    		T817WOYA3BPK5 2016-12-13 1.66 GiB
    SM-T817W_1_20170605142453_km46gmueng_fac.zip
    		Download

    No matching downloads

    How to flash T817WVLU3BPK5

    • T817WVLU3BPK5 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T817WVLU3BPK5 by region

    First release
    December 13, 2016
    Last region
    December 16, 2016
    Duration
    4 days
    Regions
    4
    1. Day 1 · · 3 regions
      CanadaBMCFMCRWC
    2. Day 4 · · 1 region
      CanadaXAC

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal24.6 cm (9.7")
    • Display resolution2048 x 1536 pixels
    • Display technologySuper AMOLED
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2.1 MP
    • Weight390 g

    Specifications of SM-T817T, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T817WVLU3BPK5 is Android 6.0.1 (Lollipop) firmware for Samsung Galaxy Tab S2 9.7, released for Canada (BMC, FMC, RWC, XAC). Samsung built it on 2016-11-28.

    No. A newer build for SM-T817W is available: T817WVLU3CQE4. Install it instead of T817WVLU3BPK5 unless you need this exact version. The previous build was T817WVLU2BPF5.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.66 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab S2 9.7 must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab S2 9.7 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab S2 9.7

    No changelog details available.
    Model firmware by region