Samsung Galaxy Tab S2 T819XXS2BRA4
SM-T819 5 countries Android 7.0 (Marshmallow)

Samsung Galaxy Tab S2 T819XXS2BRA4 Firmware

Samsung Galaxy Tab S2 T819XXS2BRA4 is an Android 7.0 (Marshmallow) firmware for 5 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T819XXU2BQI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T819 is available: T819XXS2BTJ4.

Download firmware
9.3/10 (459)39,512 times
Android 7.0 (Marshmallow)
OS Version
2018-01-16
Build Date
5
Countries
9
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    9
    MODEM/CP Version: T819XXS2BRA4
    ModelRegionCSC VersionSizeFile nameDownload
    SM-T819
    DDE Germany
    		T819DDX2BQI2 — — Download
    SM-T819
    DTM Germany
    		T819DDX2BQI2 — — Download
    SM-T819
    MAX Austria
    		T819DAX2BQI1 — — Download
    SM-T819
    PAN Hungary
    		T8192BQI1 — — Download
    SM-T819
    PHE Spain
    		T8192BQI1 — — Download
    SM-T819
    PHN Netherlands
    		T8192BQI1 — — Download
    SM-T819
    TMH Hungary
    		T8192BQI1 — — Download
    SM-T819
    TRG Austria
    		T819DAX2BQI1 — — Download
    SM-T819
    TTR Austria
    		T819DAX2BQI1 — — Download

    No matching downloads

    How to flash T819XXS2BRA4

    • T819XXS2BRA4 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid
    • Display diagonal24.6 cm (9.7")
    • Display resolution2048 x 1536 pixels
    • Display technologySuper AMOLED
    • Processor frequency1.8 GHz
    • Processor familyQualcomm Snapdragon
    • Processor modelMSM8976
    • Rear camera resolution8 MP
    • Front camera resolution2.1 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight392 g

    Frequently Asked Questions

    T819XXS2BRA4 is Android 7.0 (Marshmallow) firmware for Samsung Galaxy Tab S2, released for 5 countries, 9 CSC codes. Samsung built it on 2018-01-16.

    No. A newer build for SM-T819 is available: T819XXS2BTJ4. Install it instead of T819XXS2BRA4 unless you need this exact version. The previous build was T819XXU2BQI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab S2 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab S2 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab S2

    No changelog details available.

    · The security of your device has been improved.

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region