SM-T900 2 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab Pro 12.2 T900XXSBRI2 Firmware

Name: Samsung Galaxy Tab Pro 12.2 (SM-T900)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab Pro 12.2 T900XXSBRI2 is an Android 5.1.1 (Lollipop) firmware for France (XEF), Luxembourg (LUX). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T900XXSBPL3 https://samfirm.shop/build/T900XXSBPL3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T900 is available: T900XWUBPE1 https://samfirm.shop/build/T900XWUBPE1.

9.3/10 (471)17,371 times

Android 5.1.1 (Lollipop)

OS Version

2018-09-10

First release

other regions until 2018-12-24

n/a

Security patch

Countries

CSC codes

S (28)

Bootloader binary

Bootloader binary S (28). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab Pro 12.2 use bootloader binary U (30) (latest: T900XWUBPE1). If your device already runs binary U (30), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: T900XXSBRI2

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-T900	LUX Luxembourg	T900LUXBRH1	2018-12-24	2018-12-24	1.289 GiB	SM-T900_1_20181224100943_820gtbjww6_fac.zip
SM-T900	LUX Luxembourg	T900BRH1	2018-09-10	—	—	—
SM-T900	XEF France	T900XEFBRJ1	2018-12-24	2018-12-24	1.28 GiB	SM-T900_1_20181224103114_9424ayotuz_fac.zip
SM-T900	XEF France	T900BRJ1	2018-09-10	—	—	—

Device specifications

Launched withAndroid
Display diagonal31 cm (12.2")
Display resolution2560 x 1600 pixels
Display technologyLCD
Processor frequency1.9 GHz
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution2 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight732 g

How to flash T900XXSBRI2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T900XXSBRI2 has bootloader binary S (28). Your device must run binary S (28) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T900XXSBRI2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab Pro 12.2, released for France (XEF), Luxembourg (LUX). Samsung built it on 2018-09-10.

No. A newer build for SM-T900 is available: T900XWUBPE1. Install it instead of T900XXSBRI2 unless you need this exact version. The previous build was T900XXSBPL3.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab Pro 12.2 must be on bootloader binary S (28) or lower.

This build uses bootloader binary S (28). It can be flashed on a Samsung Galaxy Tab Pro 12.2 running binary S (28) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.