Samsung Galaxy Tab Pro 12.2 T900XXUBPE1
SM-T900 5 countries Android 5.1.1 (KitKat)

Samsung Galaxy Tab Pro 12.2 T900XXUBPE1 Firmware

Samsung Galaxy Tab Pro 12.2 T900XXUBPE1 is an Android 5.1.1 (KitKat) firmware for 5 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T900XXUBPA1: Android updated from Android 5.1.1 (Lollipop) to Android 5.1.1 (KitKat). A newer build for SM-T900 is available: T900XWUBPE1.

Download firmware
9.0/10 (462)21,929 times
Android 5.1.1 (KitKat)
OS Version
2016-05-10
Build Date
5
Countries
5
CSC codes
U (30)
Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: T900XXUBPE1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T900
    LUX Luxembourg
    		T900BOI2 — — — Download
    SM-T900
    PHE Spain
    ROM Romania
    SIO Slovenia
    		T900OXXBOI1 2016-06-13 1.291 GiB
    SM-T900_1_20170417145452_362l2we0wu_fac.zip
    		Download
    SM-T900
    XEF France
    		T900BOI2 — — — Download

    No matching downloads

    How to flash T900XXUBPE1

    • T900XXUBPE1 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T900XXUBPE1 by region

    Samsung released this build in all regions (3) on the same day, June 13, 2016.

    Device specifications

    • Launched withAndroid
    • Display diagonal31 cm (12.2")
    • Display resolution2560 x 1600 pixels
    • Display technologyLCD
    • Processor frequency1.9 GHz
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight732 g

    Frequently Asked Questions

    T900XXUBPE1 is Android 5.1.1 (KitKat) firmware for Samsung Galaxy Tab Pro 12.2, released for 5 countries, 5 CSC codes. Samsung built it on 2016-05-10.

    No. A newer build for SM-T900 is available: T900XWUBPE1. Install it instead of T900XXUBPE1 unless you need this exact version. The previous build was T900XXUBPA1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.291 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab Pro 12.2 must be on bootloader binary U (30) or lower.

    This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Tab Pro 12.2 running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab Pro 12.2

    No changelog details available.
    Model firmware by region