Samsung Galaxy A3 A300FXCS1BPK3
SM-A300F 6 countries Android 5.0.2 (Lollipop)

Samsung Galaxy A3 A300FXCS1BPK3 Firmware

Samsung Galaxy A3 A300FXCS1BPK3 is an Android 5.0.2 (Lollipop) firmware for 6 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A300FXXS1BPK3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A300F is available: A300FXXS1BRI1.

Download firmware
8.9/10 (30)39,501 times
Android 5.0.2 (Lollipop)
OS Version
2016-11-28
First release
other regions until 2017-01-31
6
Countries
9
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    6
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-A300F
    AFR Kenya
    MTZ Zambia
    MWD Morocco
    XFU Angola
    		A300FOJV1BOI1A300FXXU1BOK3 2017-01-31 2017-02-01 859.088 MiB
    SM-A300F_1_20170131193900_o35ckmklnb_fac.zip
    		Download
    SM-A300F
    AFR Kenya
    		A300FOJV1BOI1A300FXCS1BPK3 2016-11-28 — — — Download
    SM-A300F
    MAT Morocco
    MRU Mauritius
    XFA, XFE, XFM South Africa
    		A300FOJV1BOI1A300FXXU1BOK3 2016-11-28 2017-02-01 863.856 MiB
    SM-A300F_1_20210218220505_y8nshmny45_fac.zip
    		Download
    SM-A300F
    MTZ Zambia
    		A300FOJV1BOI1A300FXCS1BPK3 2016-11-28 — — — Download
    SM-A300F
    MWD Morocco
    		A300FOJV1BOI1A300FXCS1BPK3 2016-11-28 — — — Download
    SM-A300F
    XFU Angola
    		A300FOJV1BOI1A300FXCS1BPK3 2016-11-28 — — — Download

    No matching downloads

    How to flash A300FXCS1BPK3

    • A300FXCS1BPK3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of A300FXCS1BPK3 by region

    First release
    February 1, 2017
    Last region
    February 8, 2017
    Duration
    8 days
    Regions
    9
    1. Day 1 · · 8 regions
      AngolaXFUKenyaAFRMauritiusMRUMoroccoMATMWDSouth AfricaXFEXFMZambiaMTZ
    2. Day 8 · · 1 region
      South AfricaXFA

    Device specifications

    • Launched withAndroid 4.4
    • Display diagonal11.4 cm (4.5")
    • Display resolution540 x 960 pixels
    • Display typeSAMOLED
    • Processor frequency1.2 GHz
    • RAM1 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity1900 mAh
    • Weight110 g

    Frequently Asked Questions

    A300FXCS1BPK3 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy A3, released for 6 countries, 9 CSC codes. Samsung built it on 2016-11-28.

    No. A newer build for SM-A300F is available: A300FXXS1BRI1. Install it instead of A300FXCS1BPK3 unless you need this exact version. The previous build was A300FXXS1BPK3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A3 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A3 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 64 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A3

    · The security of your device has been improved.

    • The security of your device has been improved.

    No changelog details available.

    • Network connectivity enhancement.
    • The security of your device has been improved.

    No changelog details available.
    Model firmware by region