Samsung Galaxy Ace4 G313MLUBU0AOE2
SM-G313ML 4 countries Android 4.4.2 (KitKat)

Samsung Galaxy Ace4 G313MLUBU0AOE2 Firmware

Samsung Galaxy Ace4 G313MLUBU0AOE2 is an Android 4.4.2 (KitKat) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G313MLUBU0AOC2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G313ML is available: G313MLUBU0AQC1.

Download firmware
8.8/10 (461)17,501 times
Android 4.4.2 (KitKat)
OS Version
2015-05-14
Build Date
4
Countries
4
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: G313MLUBU0AOE2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G313ML
    BVO Bolivia
    		G313MLUUB0AOE2 2015-05-27 520.084 MiB
    SM-G313ML_1_20161208082054_mqb63zg7fx_fac.zip
    		Download
    SM-G313ML
    COO Colombia
    		G313MLUUB0AOE3 — — — Download
    SM-G313ML
    TCE Mexico
    		G313ML0AOF1 — — — Download
    SM-G313ML
    ZTO Brazil
    		G313ML0AOE1 — — — Download

    No matching downloads

    How to flash G313MLUBU0AOE2

    • G313MLUBU0AOE2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G313MLUBU0AOE2 by region

    Samsung released this build in all regions (1) on the same day, May 27, 2015.

    Device specifications

    • Launched withAndroid 4.4
    • Display diagonal10.2 cm (4")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • RAM0.5 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Weight124 g

    Specifications of SM-G313M, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G313MLUBU0AOE2 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Ace4, released for 4 countries, 4 CSC codes. Samsung built it on 2015-05-14.

    No. A newer build for SM-G313ML is available: G313MLUBU0AQC1. Install it instead of G313MLUBU0AOE2 unless you need this exact version. The previous build was G313MLUBU0AOC2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 520.084 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Ace4 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Ace4 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Ace4

    No changelog details available.
    Model firmware by region