SM-G350E 2 countries Android 4.4.2 (KitKat)

Samsung Galaxy Star2 Plus G350EXWU0APF2 Firmware

Name: Samsung Galaxy Star2 Plus (SM-G350E)
Brand: Samsung
Availability: InStock

Samsung Galaxy Star2 Plus G350EXWU0APF2 is an Android 4.4.2 (KitKat) firmware for Kazakhstan (CAU), Uzbekistan (CAC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G350EXWU0AOK1 https://samfirm.shop/build/G350EXWU0AOK1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G350E is available: G350EXXS0AQD1 https://samfirm.shop/build/G350EXXS0AQD1.

9.3/10 (26)8,634 times

Android 4.4.2 (KitKat)

OS Version

2016-06-20

First release

other regions until 2016-06-30

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
SM-G350E	CAC Uzbekistan	G350EOXE0APF2	G350EXXU0AOF3	2016-06-30	2016-07-01	541.963 MiB	SM-G350E_1_20160630170340_glu3ehkp00_fac.zip
SM-G350E	CAC Uzbekistan	G350EOXE0APF2	G350EXWU0APF2	2016-06-20	—	—	—
SM-G350E	CAU Kazakhstan	G350EOXE0APF2	G350EXXU0AOF3	2016-06-20	2016-07-04	543.547 MiB	SM-G350E_1_20170404065813_1ykdk66fmw_fac.zip

Device specifications

Launched withAndroid 4.4
Display diagonal10.9 cm (4.3")
Display resolution480 x 800 pixels
Display typeTFT
Processor frequency1.2 GHz
Processor modelA7
RAM0.5 GB
Rear camera resolution3 MP
Rear camera typeSingle camera
SIM cardsDual SIM
Battery capacity1800 mAh
Weight129 g

How to flash G350EXWU0APF2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G350EXWU0APF2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G350EXWU0APF2 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Star2 Plus, released for Kazakhstan (CAU), Uzbekistan (CAC). Samsung built it on 2016-06-20.

No. A newer build for SM-G350E is available: G350EXXS0AQD1. Install it instead of G350EXWU0APF2 unless you need this exact version. The previous build was G350EXWU0AOK1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Star2 Plus must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Star2 Plus running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.