Samsung Galaxy Star2 Plus G350EXWU0ANK3 Firmware
Samsung Galaxy Star2 Plus G350EXWU0ANK3 is an Android 4.4.2 (KitKat) firmware for 8 countries, 8 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G350EXXU0ANK3 https://samfirm.shop/build/G350EXXU0ANK3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G350E is available: G350EXXS0AQD1 https://samfirm.shop/build/G350EXXS0AQD1.
Android 4.4.2 (KitKat)
OS Version
2014-11-28
Build Date
8
Countries
8
CSC codes
0
Bootloader binary
Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
| Model | Region | CSC Version | MODEM/CP Version | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|
| SM-G350E |
EGY Egypt | G350EOJV0ANK3 | G350EXWU0ANK3 | — | — | — | Download |
| SM-G350E |
KSA Saudi Arabia | G350EOJV0ANK3 | G350EXWU0ANK3 | — | — | — | Download |
| SM-G350E |
LYS Libya | G350EOJV0ANK3 | G350EXWU0ANK3 | — | — | — | Download |
| SM-G350E |
MID Iraq | G350EOJV0ANK3 | G350EXWU0ANK3 | — | — | — | Download |
| SM-G350E |
MWD Morocco | G350EOJV0ANK3 | G350EXXU0ANK3 | 2014-12-22 | 555.579 MiB | SM-G350E_1_20170610131927_g7479nno9a_fac.zip | Download |
| SM-G350E |
TMC Algeria | G350EOJV0ANK3 | G350EXWU0ANK3 | — | — | — | Download |
| SM-G350E |
TUN Tunisia | G350EOJV0ANK3 | G350EXWU0ANK3 | — | — | — | Download |
| SM-G350E |
XFE South Africa | G350EOJV0ANK3 | G350EXXU0ANK3 | 2014-12-22 | 547.241 MiB | SM-G350E_1_20150907112353_ma7x6xahhl_fac.zip | Download |
No matching downloads
How to flash G350EXWU0ANK3
- G350EXWU0ANK3 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of G350EXWU0ANK3 by region
Samsung released this build in all regions (2) on the same day, December 22, 2014.
Device specifications
- Launched withAndroid 4.4
- Display diagonal10.9 cm (4.3")
- Display resolution480 x 800 pixels
- Display typeTFT
- Processor frequency1.2 GHz
- Processor modelA7
- RAM0.5 GB
- Rear camera resolution3 MP
- Rear camera typeSingle camera
- SIM cardsDual SIM
- Battery capacity1800 mAh
- Weight129 g
Frequently Asked Questions
G350EXWU0ANK3 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Star2 Plus, released for 8 countries, 8 CSC codes. Samsung built it on 2014-11-28.
No. A newer build for SM-G350E is available: G350EXXS0AQD1. Install it instead of G350EXWU0ANK3 unless you need this exact version. The previous build was G350EXXU0ANK3.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Star2 Plus must be on bootloader binary 0 or lower.
This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Star2 Plus running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy Star2 Plus
No changelog details available.
- G350EXXS0AQD1Apr 21, 2017
- G350EXWU0AQC2Mar 14, 2017
- G350EXXU0AQC1Apr 3, 2017
- G350EXWU0APF2Jun 20, 2016
- G350EXWU0AOK1Dec 24, 2015
- G350EXXU0AOJ1Oct 19, 2015
- G350EXWU0AOG1Jul 3, 2015
- G350EXXU0AOF3Jun 22, 2015
- G350EXWU0AOE2May 4, 2015
- G350EXXU0AOD1Apr 6, 2015
- G350EXXU0AOB1Feb 5, 2015
- G350EXWU0AOA1Jan 5, 2015
- G350EXWU0ANL3Dec 18, 2014
- G350EXWU0ANK3Nov 28, 2014
- G350EXXU0ANK3Nov 20, 2014
- G350EXXU0ANJ1Oct 6, 2014
- G350EXWU0ANF2Jun 24, 2014