Samsung Galaxy Core Prime G360HDDU0API1
SM-G360H 6 countries Android 4.4.4 (KitKat)

Samsung Galaxy Core Prime G360HDDU0API1 Firmware

Build Date:

Samsung Galaxy Core Prime G360HDDU0API1 is an Android 4.4.4 (KitKat) firmware for 6 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G360HXXS0API1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G360H is available: G360HDDU0AQG3.

Download firmware
8.9 (39)2,032 times
Android 4.4.4 (KitKat)
OS Version
2016-09-30
Build Date
6
Countries
7
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: G360HDDU0APF3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G360H
    AFG Afghanistan
    BTC, LYS Libya
    EGY Egypt
    THR Iran
    +2 more countries
    TUR Turkey
    XFE South Africa
    		G360HOJV0API1 2016-09-30 577.384 MiB
    SM-G360H_1_20160930112240_qw99nh98tx_fac.zip
    File on Samsung server:SM-G360H_1_20160930112240_qw99nh98tx_fac.zip.enc4
    Size: 577.38 MiB (605,430,640 B)
    CRC32 (Samsung FUS):5E9C7727
    Package contents:
    • BL_G360HDDU0API1_CL1120265_QB10859502_REV04_user_low_ship.tar.md5
    • AP_G360HDDU0API1_CL1120265_QB10859502_REV04_user_low_ship.tar.md5
    • MODEM_G360HDDU0APF3_CL2106492_QB4762162_REV02.tar.md5
    • CSC_OJV_G360HOJV0API1_CL1120265_QB10859502_REV04_user_low_ship.tar.md5
    		Download

    No matching downloads

    How to flash G360HDDU0API1

    • G360HDDU0API1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G360HDDU0API1 by region

    First release
    September 30, 2016
    Last region
    October 3, 2016
    Duration
    4 days
    Regions
    7
    1. Day 1 · · 3 regions
      AfghanistanAFGIranTHRTurkeyTUR
    2. Day 4 · · 4 regions
      EgyptEGYLibyaBTCLYSSouth AfricaXFE

    Device specifications

    • Display diagonal11.4 cm (4.5")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • Processor frequency1.2 GHz
    • RAM1 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity2000 mAh
    • Weight130 g

    Frequently Asked Questions

    G360HDDU0API1 is Android 4.4.4 (KitKat) firmware for Samsung Galaxy Core Prime, released for 6 countries, 7 CSC codes. Samsung built it on 2016-09-30.

    No. A newer build for SM-G360H is available: G360HDDU0AQG3. Install it instead of G360HDDU0API1 unless you need this exact version. The previous build was G360HXXS0API1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 577.384 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Core Prime must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Core Prime running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Core Prime

    No changelog details available.
    Model firmware by region

    New firmware for other devices

    All latest builds