Samsung Galaxy Core Prime G360MUBS1BQB3
SM-G360M 2 countries Android 5.0.2 (Lollipop)

Samsung Galaxy Core Prime G360MUBS1BQB3 Firmware

Samsung Galaxy Core Prime G360MUBS1BQB3 is an Android 5.0.2 (Lollipop) firmware for Colombia (COB, COE), Peru (PNT, PVT). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G360MUBS1BQB2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G360M is available: G360MVJS1BSA2.

Download firmware
9.3/10 (31)26,240 times
Android 5.0.2 (Lollipop)
OS Version
2017-02-13
First release
other regions until 2017-04-06
2
Countries
4
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-G360M
    COB Colombia
    		G360MTFG1BPI2G360MUBU1BQA3 2017-02-13 2017-04-05 819.622 MiB
    SM-G360M_1_20190207133027_722xq61b48_fac.zip
    		Download
    SM-G360M
    COE Colombia
    		G360MCOE1BPL3G360MUBU1BQA3 2017-04-06 2017-04-06 776.875 MiB
    SM-G360M_1_20170406100026_9y6738o58e_fac.zip
    		Download
    SM-G360M
    COE Colombia
    		G360M1BPL3G360MUBS1BQB3 2017-02-13 — — — Download
    SM-G360M
    PNT Peru
    		G360M1BPH1G360MUBS1BQB3 2017-02-13 — — — Download
    SM-G360M
    PNT Peru
    		G360MPNT1BPH1G360MUBU1BQA3 2017-02-13 2017-03-14 762.419 MiB
    SM-G360M_1_20181218125853_kytstwdpy7_fac.zip
    		Download
    SM-G360M
    PVT Peru
    		G360M1BPH1G360MUBS1BQB3 2017-02-13 — — — Download
    SM-G360M
    PVT Peru
    		G360MPVT1BPH1G360MUBU1BQA3 2017-02-13 2017-03-14 758.779 MiB
    SM-G360M_1_20181010165201_wdeegtk3bb_fac.zip
    		Download

    No matching downloads

    How to flash G360MUBS1BQB3

    • G360MUBS1BQB3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G360MUBS1BQB3 by region

    First release
    March 14, 2017
    Last region
    April 6, 2017
    Duration
    24 days
    Regions
    4
    1. Day 1 · · 2 regions
      PeruPNTPVT
    2. Day 23 · · 1 region
      ColombiaCOB
    3. Day 24 · · 1 region
      ColombiaCOE

    Device specifications

    • Display diagonal11.4 cm (4.5")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity2000 mAh
    • Weight130 g

    Specifications of SM-G360F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G360MUBS1BQB3 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy Core Prime, released for Colombia (COB, COE), Peru (PNT, PVT). Samsung built it on 2017-02-13.

    No. A newer build for SM-G360M is available: G360MVJS1BSA2. Install it instead of G360MUBS1BQB3 unless you need this exact version. The previous build was G360MUBS1BQB2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Core Prime must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Core Prime running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 56 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Core Prime

    No changelog details available.
    Model firmware by region