Samsung Galaxy XCover 4s G398FNXXSJCWF2
SM-G398FN 11 countries Android 11

Samsung Galaxy XCover 4s G398FNXXSJCWF2 Firmware

Samsung Galaxy XCover 4s G398FNXXSJCWF2 is an Android 11 firmware for 11 countries, 15 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G398FNXXSJCWF1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-G398FN.

9.3/10 (496)58,125 times
Android 11
OS Version
2023-07-10
First release
other regions until 2023-07-17
2023-07-01
Security patch
11
Countries
15
CSC codes
J (19)
Bootloader binary

Bootloader binary J (19). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    4
    MODEM/CP Version: G398FNXXSJCWF1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-G398FN
    KSA Saudi Arabia
    TUR Turkey
    XFA, XFV South Africa
    		G398FNOJMJCWF2 2023-07-10 2023-07-10 3.916 GiB
    SM-G398FN_2_20230626175700_oeq1v3gvdq_fac.zip
    SM-G398FN
    MWD Morocco
    		G398FNOJMJCWF4 2023-07-10 2023-07-10 3.916 GiB
    SM-G398FN_2_20230626175450_oby00qfv37_fac.zip
    SM-G398FN
    NZC, TNZ, VNZ, XNZ New Zealand
    THL Thailand
    XME Malaysia
    XSA Australia
    +2 more countries
    XSP Singapore
    XXV Vietnam
    		G398FNOLMJCWF2 2023-07-17 2023-07-17 4.012 GiB
    SM-G398FN_2_20230703113630_c1weiyi30p_fac.zip
    SM-G398FN
    XSG United Arab Emirates
    		G398FNOJMJCWF3 2023-07-10 2023-07-10 3.916 GiB
    SM-G398FN_2_20230626175240_0nqj3bp34x_fac.zip

    No matching downloads

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal12.7 cm (5")
    • Display resolution720 x 1280 pixels
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2800 mAh

    What's new in G398FNXXSJCWF2

    • Security
    The device is protected with improved security.

    Rollout of G398FNXXSJCWF2 by region

    First release on July 10, 2023: KSA (Saudi Arabia), MWD (Morocco), TUR (Turkey). Regions in total: 15, the rollout took 8 days, the last region got the build on July 18, 2023.

    • 2023-07-10 KSA (Saudi Arabia), MWD (Morocco), TUR (Turkey), XFA (South Africa), XFV (South Africa), XSG (United Arab Emirates)
    • 2023-07-17 NZC (New Zealand), THL (Thailand), TNZ (New Zealand), VNZ (New Zealand), XNZ (New Zealand), XSA (Australia), XXV (Vietnam)
    • 2023-07-18 XME (Malaysia), XSP (Singapore)

    How to flash G398FNXXSJCWF2

    • G398FNXXSJCWF2 has bootloader binary J (19). Your device must run binary J (19) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G398FNXXSJCWF2 is Android 11 firmware for Samsung Galaxy XCover 4s, released for 11 countries, 15 CSC codes. It includes the 2023-07-01 security patch. Samsung built it on 2023-07-10.

    Yes. G398FNXXSJCWF2 is the newest build for SM-G398FN on SamFirm. The previous build was G398FNXXSJCWF1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy XCover 4s must be on bootloader binary J (19) or lower.

    This build uses bootloader binary J (19). It can be flashed on a Samsung Galaxy XCover 4s running binary J (19) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy XCover 4s

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Show 12 older builds

    • The security of your device has been improved.

    Model firmware by region