Samsung Galaxy XCover 4s G398FNXXSHCWA1
SM-G398FN 7 countries Android 11

Samsung Galaxy XCover 4s G398FNXXSHCWA1 Firmware

Samsung Galaxy XCover 4s G398FNXXSHCWA1 is an Android 11 firmware for 7 countries, 11 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G398FNXXUHCVK3: security patch 2023-01-01 instead of 2022-11-01. A newer build for SM-G398FN is available: G398FNXXSJCWF2.

Download firmware
9.4/10 (469)46,693 times
Android 11
OS Version
2023-01-31
Build Date
2023-01-01
Security patch
7
Countries
11
CSC codes
H (17)
Bootloader binary

Bootloader binary H (17). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy XCover 4s use bootloader binary J (19) (latest: G398FNXXSJCWF2). If your device already runs binary J (19), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    MODEM/CP Version: G398FNXXUHCVK1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-G398FN
    AMO Spain
    FTM France
    OPV Poland
    ORS Slovakia
    		G398FNOGCHCVL1 2023-01-31 2023-01-31 3.89 GiB
    SM-G398FN_2_20230125140410_9ee03ovf0b_fac.zip
    		Download
    SM-G398FN
    MAX, TRG Austria
    TMS Slovakia
    TMZ Czechia
    TPL Poland
    		G398FNODXHCVL1 2023-01-31 2023-01-31 4.059 GiB
    SM-G398FN_2_20230125140140_e16ytp0irs_fac.zip
    		Download
    SM-G398FN
    SWC Switzerland
    VDC Czechia
    		G398FNOVFHCVL1 2023-01-31 2023-01-31 3.904 GiB
    SM-G398FN_2_20230125140710_mj5xhyksfr_fac.zip
    		Download

    No matching downloads

    How to flash G398FNXXSHCWA1

    • G398FNXXSHCWA1 has bootloader binary H (17). Your device must run binary H (17) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G398FNXXSHCWA1

    • The security of your device has been improved.

    Rollout of G398FNXXSHCWA1 by region

    Samsung released this build in all regions (11) on the same day, January 31, 2023.

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal12.7 cm (5")
    • Display resolution720 x 1280 pixels
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2800 mAh

    Frequently Asked Questions

    G398FNXXSHCWA1 is Android 11 firmware for Samsung Galaxy XCover 4s, released for 7 countries, 11 CSC codes. It includes the 2023-01-01 security patch. Samsung built it on 2023-01-31.

    No. A newer build for SM-G398FN is available: G398FNXXSJCWF2. Install it instead of G398FNXXSHCWA1 unless you need this exact version. The previous build was G398FNXXUHCVK3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy XCover 4s must be on bootloader binary H (17) or lower.

    This build uses bootloader binary H (17). It can be flashed on a Samsung Galaxy XCover 4s running binary H (17) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy XCover 4s

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Show 12 older builds

    • The security of your device has been improved.

    Model firmware by region