Samsung Galaxy XCover 4s G398FNXXSICWD5
SM-G398FN 11 countries Android 11

Samsung Galaxy XCover 4s G398FNXXSICWD5 Firmware

Samsung Galaxy XCover 4s G398FNXXSICWD5 is an Android 11 firmware for 11 countries, 15 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G398FNXXUICWD2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G398FN is available: G398FNXXSJCWF2.

Download firmware
9.3/10 (484)58,613 times
Android 11
OS Version
2023-04-26
Build Date
2023-04-01
Security patch
11
Countries
15
CSC codes
I (18)
Bootloader binary

Bootloader binary I (18). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy XCover 4s use bootloader binary J (19) (latest: G398FNXXSJCWF2). If your device already runs binary J (19), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    4
    MODEM/CP Version: G398FNXXSICWD5
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-G398FN
    KSA Saudi Arabia
    TUR Turkey
    XFA, XFV South Africa
    		G398FNOJMICWD5 2023-04-26 2023-04-26 3.915 GiB
    SM-G398FN_2_20230420133420_vo604sz9sx_fac.zip
    		Download
    SM-G398FN
    MWD Morocco
    		G398FNOJMICWD7 2023-04-26 2023-04-26 3.915 GiB
    SM-G398FN_2_20230420133050_hfa3rny11u_fac.zip
    		Download
    SM-G398FN
    NZC, TNZ, VNZ, XNZ New Zealand
    THL Thailand
    XME Malaysia
    XSA Australia
    +2 more countries
    XSP Singapore
    XXV Vietnam
    		G398FNOLMICWD5 2023-04-26 2023-04-27 4.012 GiB
    SM-G398FN_2_20230419161700_7prfs4vtyq_fac.zip
    		Download
    SM-G398FN
    XSG United Arab Emirates
    		G398FNOJMICWD6 2023-04-26 2023-04-26 3.915 GiB
    SM-G398FN_2_20230420133220_6nbt2u37b9_fac.zip
    		Download

    No matching downloads

    How to flash G398FNXXSICWD5

    • G398FNXXSICWD5 has bootloader binary I (18). Your device must run binary I (18) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G398FNXXSICWD5

    • The security of your device has been improved.

    Rollout of G398FNXXSICWD5 by region

    First release
    April 26, 2023
    Last region
    April 27, 2023
    Duration
    2 days
    Regions
    15
    1. Day 1 · · 6 regions
      MoroccoMWDSaudi ArabiaKSASouth AfricaXFAXFVTurkeyTURUnited Arab EmiratesXSG
    2. Day 2 · · 9 regions
      AustraliaXSAMalaysiaXMENew ZealandNZCTNZVNZXNZSingaporeXSPThailandTHLVietnamXXV

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal12.7 cm (5")
    • Display resolution720 x 1280 pixels
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2800 mAh

    Frequently Asked Questions

    G398FNXXSICWD5 is Android 11 firmware for Samsung Galaxy XCover 4s, released for 11 countries, 15 CSC codes. It includes the 2023-04-01 security patch. Samsung built it on 2023-04-26.

    No. A newer build for SM-G398FN is available: G398FNXXSJCWF2. Install it instead of G398FNXXSICWD5 unless you need this exact version. The previous build was G398FNXXUICWD2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy XCover 4s must be on bootloader binary I (18) or lower.

    This build uses bootloader binary I (18). It can be flashed on a Samsung Galaxy XCover 4s running binary I (18) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy XCover 4s

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Show 12 older builds

    • The security of your device has been improved.

    Model firmware by region