Samsung Galaxy J5 Prime G570FXXU2CSL3
SM-G570F 5 countries Android 8.0.0 (Oreo)

Samsung Galaxy J5 Prime G570FXXU2CSL3 Firmware

Samsung Galaxy J5 Prime G570FXXU2CSL3 is an Android 8.0.0 (Oreo) firmware for 5 countries, 6 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G570FXXU2CSL2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G570F is available: G570FXXS4CTJA.

Download firmware
9.4/10 (34)27,352 times
Android 8.0.0 (Oreo)
OS Version
2019-12-17
First release
other regions until 2020-01-07
2019-12-01
Security patch
5
Countries
6
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J5 Prime use bootloader binary 4 (latest: G570FXXS4CTJA). If your device already runs binary 4, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-G570F
    DKR Kenya
    KSA, WTL Saudi Arabia
    THR Iran
    XFA South Africa
    		G570FOJV2CSL1G570FXXU2CSL1 2020-01-07 2020-02-07 2.209 GiB
    SM-G570F_1_20200107160354_nlt9ltxnz8_fac.zip
    SM-G570F
    DKR Kenya
    		G570FOJV2CSL1G570FXXU2CSL3 2019-12-17 2020-02-29 — —
    SM-G570F
    KSA Saudi Arabia
    		G570FOJV2CSL1G570FXXU2CSL3 2019-12-17 2020-02-07 — —
    SM-G570F
    THR Iran
    		G570FOJV2CSL1G570FXXU2CSL3 2019-12-17 2020-02-19 — —
    SM-G570F
    TMC Algeria
    		G570FOJV2CSL1G570FXXU2CSL1 2020-01-07 2020-02-19 2.208 GiB
    SM-G570F_1_20201022143004_8rbifs1xi0_fac.zip
    SM-G570F
    WTL Saudi Arabia
    		G570FOJV2CSL1G570FXXU2CSL3 2019-12-17 2020-02-19 — —
    SM-G570F
    XFA South Africa
    		G570FOJV2CSL1G570FXXU2CSL3 2019-12-17 2020-02-29 — —

    No matching downloads

    How to flash G570FXXU2CSL3

    • G570FXXU2CSL3 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G570FXXU2CSL3

    · The security of your device has been improved.

    Rollout of G570FXXU2CSL3 by region

    First release
    February 7, 2020
    Last region
    February 29, 2020
    Duration
    23 days
    Regions
    6
    1. Day 1 · · 1 region
      Saudi ArabiaKSA
    2. Day 13 · · 3 regions
      AlgeriaTMCIranTHRSaudi ArabiaWTL
    3. Day 23 · · 2 regions
      KenyaDKRSouth AfricaXFA

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeTFT
    • Processor frequency1.4 GHz
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity2400 mAh
    • Weight143 g

    Frequently Asked Questions

    G570FXXU2CSL3 is Android 8.0.0 (Oreo) firmware for Samsung Galaxy J5 Prime, released for 5 countries, 6 CSC codes. It includes the 2019-12-01 security patch. Samsung built it on 2019-12-17.

    No. A newer build for SM-G570F is available: G570FXXS4CTJA. Install it instead of G570FXXU2CSL3 unless you need this exact version. The previous build was G570FXXU2CSL2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J5 Prime must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy J5 Prime running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J5 Prime

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    · The security of your device has been improved.

    No changelog details available.
    Show 9 older builds

    · The security of your device has been improved.

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Model firmware by region