Samsung Galaxy S6 edge+ G928FXXS3CQL2
SM-G928F 13 countries Android 7.0 (Lollipop)

Samsung Galaxy S6 edge+ G928FXXS3CQL2 Firmware

Samsung Galaxy S6 edge+ G928FXXS3CQL2 is an Android 7.0 (Lollipop) firmware for 13 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G928FXXS3CQK8, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G928F is available: G928FXXU5CVG3.

Download firmware
9.3/10 (461)61,386 times
Android 7.0 (Lollipop)
OS Version
2017-12-05
Build Date
13
Countries
14
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 edge+ use bootloader binary 5 (latest: G928FXXU5CVG3). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    14
    MODEM/CP Version: G928FXXS3CQL2
    ModelRegionCSC VersionSizeFile nameDownload
    SM-G928F
    ATO Austria
    		G928F3CQJ1 — — Download
    SM-G928F
    BGL Bulgaria
    		G928FOXX3CQI1 — — Download
    SM-G928F
    CAC Uzbekistan
    		G928FOXE3CQJ1 — — Download
    SM-G928F
    CAU Kazakhstan
    		G928FOXE3CQJ1 — — Download
    SM-G928F
    CYO Cyprus
    		G928FOXX3CQI1 — — Download
    SM-G928F
    ROM Romania
    		G928FOXX3CQI1 — — Download
    SM-G928F
    SEB Baltic Europe
    		G928FOXX3CQI1 — — Download
    SM-G928F
    SEE Serbia
    		G928FOXX3CQI1 — — Download
    SM-G928F
    SEK Ukraine
    		G928FOXE3CQJ1 — — Download
    SM-G928F
    SER Russia
    		G928FOXE3CQJ1 — — Download
    SM-G928F
    SIO Slovenia
    		G928FOXX3CQI1 — — Download
    SM-G928F
    SKZ Kazakhstan
    		G928FOXE3CQJ1 — — Download
    SM-G928F
    XEF France
    		G928FOXX3CQI1 — — Download
    SM-G928F
    XEO Poland
    		G928FOXX3CQI1 — — Download

    No matching downloads

    How to flash G928FXXS3CQL2

    • G928FXXS3CQL2 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3000 mAh
    • Weight153 g

    Frequently Asked Questions

    G928FXXS3CQL2 is Android 7.0 (Lollipop) firmware for Samsung Galaxy S6 edge+, released for 13 countries, 14 CSC codes. Samsung built it on 2017-12-05.

    No. A newer build for SM-G928F is available: G928FXXU5CVG3. Install it instead of G928FXXS3CQL2 unless you need this exact version. The previous build was G928FXXS3CQK8.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 edge+ must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy S6 edge+ running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 67 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6 edge+

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region