Samsung Galaxy S Ⅱ I9100BOLPM
GT-I9100 2 countries

Samsung Galaxy S Ⅱ I9100BOLPM Firmware

Samsung Galaxy S Ⅱ I9100BOLPM is an Android firmware for Austria (MAX, TRG), Macedonia (MBM). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for GT-I9100 is available: I9100ZSMSA.

Download firmware
9.1/10 (477)15,445 times
2012-08-31
Build Date
2
Countries
3
CSC codes
B (11)
Bootloader binary

Bootloader binary B (11). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S Ⅱ use bootloader binary Z (35) (latest: I9100ZSMSA). If your device already runs binary Z (35), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: I9100BOLP7
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    GT-I9100
    MAX Austria
    		I9100MAXLP8 2012-08-31 2012-09-21 — — Download
    GT-I9100
    MBM Macedonia
    		I9100MBMLP8 2012-08-31 2012-09-27 — — Download
    GT-I9100
    TRG Austria
    		I9100TRGLP4 — 2012-09-21 — — Download

    No matching downloads

    How to flash I9100BOLPM

    • I9100BOLPM has bootloader binary B (11). Your device must run binary B (11) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of I9100BOLPM by region

    First release
    September 21, 2012
    Last region
    September 27, 2012
    Duration
    7 days
    Regions
    3
    1. Day 1 · · 2 regions
      AustriaMAXTRG
    2. Day 7 · · 1 region
      MacedoniaMBM

    Device specifications

    • Launched withAndroid 2.3
    • Display diagonal10.8 cm (4.27")
    • Display resolution480 x 800 pixels
    • Display typeAMOLED
    • Processor frequency1.2 GHz
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1650 mAh
    • Weight116 g

    Frequently Asked Questions

    No. A newer build for GT-I9100 is available: I9100ZSMSA. Install it instead of I9100BOLPM unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S Ⅱ must be on bootloader binary B (11) or lower.

    This build uses bootloader binary B (11). It can be flashed on a Samsung Galaxy S Ⅱ running binary B (11) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary B (11).

    Other builds and changelog for Samsung Galaxy S Ⅱ

    No changelog details available.
    Model firmware by region