SM-J106F 2 countries Android 6.0.1 (Marshmallow)

Samsung J1 Mini Prime J106FJVU0ARC4 Firmware

Name: Samsung J1 Mini Prime (SM-J106F)
Brand: Samsung
Availability: InStock

Samsung J1 Mini Prime J106FJVU0ARC4 is an Android 6.0.1 (Marshmallow) firmware for Russia (SER), Uzbekistan (CAC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J106FJVU0ARC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J106F is available: J106FJVU0ARL1.

9.1/10 (472)8,496 times

Android 6.0.1 (Marshmallow)

OS Version

2018-03-24

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: J106FJVU0AQI2

Model	Region	CSC Version	Release date	Size	File name	Download
SM-J106F	CAC Uzbekistan SER Russia	J106FOXE0ARC1	2018-04-05	1.335 GiB	SM-J106F_2_20180509131301_xbr2f2mihs_fac.zip

Device specifications

Display diagonal10.2 cm (4")
Display resolution480 x 800 pixels
Display typeTFT
Processor frequency1.5 GHz
RAM1 GB
Rear camera resolution5 MP
Rear camera typeSingle camera
Battery capacity1500 mAh
Weight126 g

How to flash J106FJVU0ARC4

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J106FJVU0ARC4 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J106FJVU0ARC4 is Android 6.0.1 (Marshmallow) firmware for Samsung J1 Mini Prime, released for Russia (SER), Uzbekistan (CAC). Samsung built it on 2018-03-24.

No. A newer build for SM-J106F is available: J106FJVU0ARL1. Install it instead of J106FJVU0ARC4 unless you need this exact version. The previous build was J106FJVU0ARC1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.335 GiB; keep about twice that free on the computer to unzip it. The Samsung J1 Mini Prime must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung J1 Mini Prime running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 18 other builds of this model use the same binary, so you can switch between them in both directions.