Samsung J1 Mini Prime J106FJVS0ARF2
SM-J106F 9 countries Android 6.0.1 (Marshmallow)

Samsung J1 Mini Prime J106FJVS0ARF2 Firmware

Samsung J1 Mini Prime J106FJVS0ARF2 is an Android 6.0.1 (Marshmallow) firmware for 9 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J106FJVS0ARF1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J106F is available: J106FJVU0ARL1.

Download firmware
9.0/10 (457)78,467 times
Android 6.0.1 (Marshmallow)
OS Version
2018-06-18
Build Date
9
Countries
14
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    5
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-J106F
    ACR, KSA, WTL Saudi Arabia
    AFR Kenya
    EGY Egypt
    LYS Libya
    +4 more countries
    THR Iran
    TMC Algeria
    TUN Tunisia
    XFA, XFE South Africa
    		J106FOJV0ARC1J106FJVU0ARB3 2018-06-26 1.322 GiB
    SM-J106F_2_20181001183353_581fgmue67_fac.zip
    SM-J106F
    AFR Kenya
    EGY Egypt
    XFA South Africa
    		J106FOJV0ARC2J106FJWU0ARB3 2018-07-09 1.322 GiB
    SM-J106F_1_20181011164727_q2ma65h0h5_fac.zip
    SM-J106F
    MAT, MWD Morocco
    		J106FOJV0ARC2J106FJWU0ARB3 2018-07-09 1.308 GiB
    SM-J106F_1_20190103185727_we5n8oqvof_fac.zip
    SM-J106F
    XFV South Africa
    		J106F0ARC1J106FJVS0ARF2 — — —
    SM-J106F
    XFV South Africa
    		J106FXFV0ARC1J106FJWU0ARB3 2018-07-12 1.277 GiB
    SM-J106F_1_20181004160053_e42o143r25_fac.zip

    No matching downloads

    How to flash J106FJVS0ARF2

    • J106FJVS0ARF2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J106FJVS0ARF2 by region

    First release
    June 26, 2018
    Last region
    July 12, 2018
    Duration
    17 days
    Regions
    14
    1. Day 1 · · 11 regions
      AlgeriaTMCEgyptEGYIranTHRKenyaAFRLibyaLYSSaudi ArabiaACRKSAWTLSouth AfricaXFAXFETunisiaTUN
    2. Day 14 · · 2 regions
      MoroccoMATMWD
    3. Day 17 · · 1 region
      South AfricaXFV

    Device specifications

    • Display diagonal10.2 cm (4")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • Processor frequency1.5 GHz
    • RAM1 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity1500 mAh
    • Weight126 g

    Frequently Asked Questions

    J106FJVS0ARF2 is Android 6.0.1 (Marshmallow) firmware for Samsung J1 Mini Prime, released for 9 countries, 14 CSC codes. Samsung built it on 2018-06-18.

    No. A newer build for SM-J106F is available: J106FJVU0ARL1. Install it instead of J106FJVS0ARF2 unless you need this exact version. The previous build was J106FJVS0ARF1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung J1 Mini Prime must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung J1 Mini Prime running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 18 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung J1 Mini Prime

    No changelog details available.
    Model firmware by region