Samsung Galaxy J3(2016) J320MUBS0AQL3
SM-J320M 6 countries Android 5.1.1 (Lollipop)

Samsung Galaxy J3(2016) J320MUBS0AQL3 Firmware

First release:

Samsung Galaxy J3(2016) J320MUBS0AQL3 is an Android 5.1.1 (Lollipop) firmware for 6 countries, 6 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J320MUBS0AQL2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J320M is available: J320MUBU0ASG1.

Download firmware
9.4 (471)30,980 times
Android 5.1.1 (Lollipop)
OS Version
2017-12-19
First release
other regions until 2018-09-17
6
Countries
6
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-J320M
    COM Colombia
    CTI Argentina
    CTP Paraguay
    CTU Uruguay
    		J320MUWA0AQJ1J320MUBU0AQH2 2018-09-17 2018-01-23 1.168 GiB
    SM-J320M_1_20180119133440_s4d0h5iw3p_fac.zip
    		Download
    SM-J320M
    COM Colombia
    		J320MUWA0AQJ1J320MUBS0AQL3 2017-12-19 — — — Download
    SM-J320M
    CRC Chile
    PGU Guatemala
    		J320MUWA0AQL1J320MUBU0AQH2 2018-01-23 2018-01-23 1.099 GiB
    SM-J320M_1_20180119104901_y776ukbuy7_fac.zip
    		Download

    No matching downloads

    How to flash J320MUBS0AQL3

    • J320MUBS0AQL3 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J320MUBS0AQL3 by region

    First release
    January 23, 2018
    Last region
    September 17, 2018
    Duration
    238 days
    Regions
    6
    1. Day 1 · · 5 regions
      ArgentinaCTIChileCRCGuatemalaPGUParaguayCTPUruguayCTU
    2. Day 238 · · 1 region
      ColombiaCOM

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • RAM1.5 GB
    • RAM typeLPDDR3
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity2600 mAh
    • Weight138 g

    Specifications of SM-J320F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J320MUBS0AQL3 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy J3(2016), released for 6 countries, 6 CSC codes. Samsung built it on 2017-12-19.

    No. A newer build for SM-J320M is available: J320MUBU0ASG1. Install it instead of J320MUBS0AQL3 unless you need this exact version. The previous build was J320MUBS0AQL2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J3(2016) must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J3(2016) running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 46 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J3(2016)

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    • Improved battery usage time
    No changelog details available.
    Model firmware by region

    New firmware for other devices

    All latest builds