Samsung Galaxy J3(2017) J330FNXXU3ARC2
SM-J330FN 12 countries Android 7.0 (Nougat)

Samsung Galaxy J3(2017) J330FNXXU3ARC2 Firmware

Samsung Galaxy J3(2017) J330FNXXU3ARC2 is an Android 7.0 (Nougat) firmware for 12 countries, 12 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J330FNXXU3ARC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J330FN is available: J330FNXXU4CZC1.

Download firmware
8.9/10 (482)52,339 times
Android 7.0 (Nougat)
OS Version
2018-03-14
Build Date
12
Countries
12
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J3(2017) use bootloader binary 4 (latest: J330FNXXU4CZC1). If your device already runs binary 4, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: J330FNXXU3ARB3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-J330FN
    ATL Spain
    CNX Romania
    CYV Cyprus
    OMN Italy
    +8 more countries
    TCL Portugal
    VD2 Germany
    VDC Czechia
    VDH Hungary
    VDI Ireland
    VGR Greece
    VIP Croatia
    VOD United Kingdom
    		J330FNVFG3ARC2 2018-04-27 2.61 GiB
    SM-J330FN_1_20210423212536_bmk737rgvx_fac.zip
    MD5:cdd23a64e4bbf9522cf7d05f3d5503cd
    SHA1:a801d3e0767774acc00e703a6a35a896c3be3bd6
    		Download

    No matching downloads

    How to flash J330FNXXU3ARC2

    • J330FNXXU3ARC2 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J330FNXXU3ARC2 by region

    First release
    April 27, 2018
    Last region
    May 17, 2018
    Duration
    21 days
    Regions
    12
    1. Day 1 · · 7 regions
      CroatiaVIPCzechiaVDCGermanyVD2GreeceVGRHungaryVDHRomaniaCNXSpainATL
    2. Day 6 · · 2 regions
      IrelandVDIPortugalTCL
    3. Day 8 · · 1 region
      United KingdomVOD
    4. Day 15 · · 1 region
      ItalyOMN
    5. Day 21 · · 1 region
      CyprusCYV

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • Processor frequency1.4 GHz
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2400 mAh
    • Weight142 g

    Frequently Asked Questions

    J330FNXXU3ARC2 is Android 7.0 (Nougat) firmware for Samsung Galaxy J3(2017), released for 12 countries, 12 CSC codes. Samsung built it on 2018-03-14.

    No. A newer build for SM-J330FN is available: J330FNXXU4CZC1. Install it instead of J330FNXXU3ARC2 unless you need this exact version. The previous build was J330FNXXU3ARC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.61 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J3(2017) must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy J3(2017) running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 33 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J3(2017)

    No changelog details available.

    · The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    Model firmware by region