Samsung Galaxy J3 Pro J330GDXU3ARD1
SM-J330G 9 countries Android 7.0 (Nougat)

Samsung Galaxy J3 Pro J330GDXU3ARD1 Firmware

Samsung Galaxy J3 Pro J330GDXU3ARD1 is an Android 7.0 (Nougat) firmware for 9 countries, 12 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J330GDXU2ARC1: bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds. A newer build for SM-J330G is available: J330GDXU3CZC1.

9.0/10 (474)52,192 times
Android 7.0 (Nougat)
OS Version
2018-04-05
Build Date
n/a
Security patch
9
Countries
12
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    MODEM/CP Version: J330GDXU3ARD1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-J330G
    BRI Taiwan
    		J330GZZT3ARD1 2018-11-16 2.248 GiB
    SM-J330G_1_20210421110938_2cfza4nu2h_fac.zip
    SM-J330G
    CAM Cambodia
    LAO Laos
    MM1, SIN, STH, XSP Singapore
    MYM Myanmar (Burma)
    +3 more countries
    THL Thailand
    XME Malaysia
    XXV Vietnam
    		J330GOLB3ARD1 2018-04-30 2.248 GiB
    SM-J330G_1_20210421084908_icpv3fjvib_fac.zip
    SM-J330G
    XID Indonesia
    		J330GOLE3ARD1 2018-04-30 2.178 GiB
    SM-J330G_1_20210421111108_uo85ihb3om_fac.zip

    No matching downloads

    How to flash J330GDXU3ARD1

    • J330GDXU3ARD1 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in J330GDXU3ARD1

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Rollout of J330GDXU3ARD1 by region

    First release
    April 30, 2018
    Last region
    November 16, 2018
    Duration
    201 days
    Regions
    12
    1. Day 1 · · 7 regions
      CambodiaCAMIndonesiaXIDLaosLAOMalaysiaXMEMyanmar (Burma)MYMThailandTHLVietnamXXV
    2. Day 52 · · 4 regions
      SingaporeMM1SINSTHXSP
    3. Day 201 · · 1 region
      TaiwanBRI

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution720 x 1280 pixels
    • Display typeTFT-LCD
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity2400 mAh
    • Weight142 g

    Specifications of SM-J330, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J330GDXU3ARD1 is Android 7.0 (Nougat) firmware for Samsung Galaxy J3 Pro, released for 9 countries, 12 CSC codes. Samsung built it on 2018-04-05.

    No. A newer build for SM-J330G is available: J330GDXU3CZC1. Install it instead of J330GDXU3ARD1 unless you need this exact version. The previous build was J330GDXU2ARC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J3 Pro must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy J3 Pro running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J3 Pro

    No changelog details available.

    • The security of your device has been improved.

    The exact changes may differ depending on your device model, country/Region, and service provider.

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    · The security of your device has been improved.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Show 15 older builds
    No changelog details available.
    Upgraded One UI for Android Pie 9.0

    One UI brings you Android Pie 9.0, with exciting new features and a whole new look and feel based on feedback from users in Samsung and Google.
    We recommend that you back up your important data to keep it safe before the upgrade.
    Some apps, including Calculator, Samsung Internet, Samsung Health, Samsung Notes, and Samsung Members, need to be updated individually after you update your OS.
    To use the Remote unlock function in Find My Mobile on an Android Pie 9....

    No changelog details available.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    · The security of your device has been improved.

    No changelog details available.

    - Other bug fixes
    ㆍThe stability of device is improved.
    ㆍBluetooth connectivity and stability has been improved.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Samsung Experience 9.0 upgrade with Android Oreo

    Samsung Experience 9.0 brings you Android Oreo, with exciting new features from Samsung and Google based on feedback from users like you.

    We recommend that you back up your important data to keep it safe during the upgrade.
    Some apps, including Samsung Internet, Samsung Notes, and Email, should be updated individually before you can update your OS.

    Here’s what’s new.

    Quick Panel
    - Manage notifications for each app with notification categories...

    No changelog details available.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    No changelog details available.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    No changelog details available.
    Model firmware by region