Samsung Galaxy J4+ J415GUBS4BTA1
SM-J415G 10 countries Android 9 (Pie)

Samsung Galaxy J4+ J415GUBS4BTA1 Firmware

Samsung Galaxy J4+ J415GUBS4BTA1 is an Android 9 (Pie) firmware for 10 countries, 11 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J415GUBU4BSL3: security patch 2020-02-01 instead of 2019-12-01. A newer build for SM-J415G is available: J415GUBU6BZB2.

Download firmware
9.3/10 (478)48,486 times
Android 9 (Pie)
OS Version
2020-01-29
First release
other regions until 2020-02-05
2020-02-01
Security patch
10
Countries
11
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J4+ use bootloader binary 6 (latest: J415GUBU6BZB2). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    4
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-J415G
    CDR Dominican Republic
    CHL, CRC Chile
    CPA Panama
    CTI Argentina
    +3 more countries
    CTP Paraguay
    PCT Puerto Rico
    PGU Guatemala
    		J415GOWA4BSL3J415GUBU4BSL3 2020-02-05 2020-02-19 2.517 GiB
    SM-J415G_1_20221130015501_vuhp2ej1nm_fac.zip
    MD5:a56873e891082f30affe90561964c39f
    SHA1:66ced2a34383d2aa6ed64defe299b5dc26085d68
    		Download
    SM-J415G
    ECO Ecuador
    		J415GOWA4BSL3J415GUBS4BTA1 2020-01-29 2020-02-19 — — Download
    SM-J415G
    TCE Mexico
    		J415GOWA4BSL3J415GUBS4BTA1 2020-01-29 2020-02-19 — — Download
    SM-J415G
    ZTA Brazil
    		J415GOWA4BSL3J415GUBU4BSL3 2020-02-05 2020-02-19 2.512 GiB
    SM-J415G_1_20221130015421_zlk8vzydlg_fac.zip
    		Download

    No matching downloads

    How to flash J415GUBS4BTA1

    • J415GUBS4BTA1 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in J415GUBS4BTA1

    · Security patch update

    Rollout of J415GUBS4BTA1 by region

    Samsung released this build in all regions (11) on the same day, February 19, 2020.

    Device specifications

    • Launched withAndroid 8.1
    • Display diagonal15.2 cm (6")
    • Display resolution720 x 1480 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity3300 mAh
    • Weight178 g

    Specifications of SM-J415F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J415GUBS4BTA1 is Android 9 (Pie) firmware for Samsung Galaxy J4+, released for 10 countries, 11 CSC codes. It includes the 2020-02-01 security patch. Samsung built it on 2020-01-29.

    No. A newer build for SM-J415G is available: J415GUBU6BZB2. Install it instead of J415GUBS4BTA1 unless you need this exact version. The previous build was J415GUBU4BSL3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J4+ must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy J4+ running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J4+

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    · Security patch update

    • The security of your device has been improved.

    • LGPD (General Personal Data Protection Law) has been applied.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 4 older builds
    No changelog details available.

    • The security of your device has been improved.

    • Added new feature. - Samsung Pay mini
    • The security of your device has been improved.

    Model firmware by region