Samsung Galaxy J5(2016) J510FNXXU1APCD
SM-J510FN 3 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy J5(2016) J510FNXXU1APCD Firmware

Samsung Galaxy J5(2016) J510FNXXU1APCD is an Android 6.0.1 (Marshmallow) firmware for Czechia (TMZ), Greece (COS), Hungary (TMH). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J510FNXXU1APCA, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J510FN is available: J510FNXXS3BTJ9.

Download firmware
9.0/10 (455)13,204 times
Android 6.0.1 (Marshmallow)
OS Version
2016-03-29
Build Date
n/a
Security patch
3
Countries
3
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J5(2016) use bootloader binary 3 (latest: J510FNXXS3BTJ9). If your device already runs binary 3, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: J510FNXXU1APCD
    ModelRegionCSC VersionSizeFile nameDownload
    SM-J510FN
    COS Greece
    		J510FN1APC3 — —
    SM-J510FN
    TMH Hungary
    		J510FN1APC3 — —
    SM-J510FN
    TMZ Czechia
    		J510FN1APD1 — —

    No matching downloads

    How to flash J510FNXXU1APCD

    • J510FNXXU1APCD has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal13.2 cm (5.2")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • Processor frequency1.2 GHz
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3100 mAh
    • Weight158 g

    Frequently Asked Questions

    J510FNXXU1APCD is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy J5(2016), released for Czechia (TMZ), Greece (COS), Hungary (TMH). Samsung built it on 2016-03-29.

    No. A newer build for SM-J510FN is available: J510FNXXS3BTJ9. Install it instead of J510FNXXU1APCD unless you need this exact version. The previous build was J510FNXXU1APCA.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J5(2016) must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J5(2016) running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 24 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J5(2016)

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    Show 15 older builds

    • The security of your device has been improved.

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    No changelog details available.

    · The security of your device has been improved.

    • The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    No changelog details available.
    · GDPR has been added.(General Data Protection Regulation)
    No changelog details available.
    Model firmware by region