Samsung Galaxy J7 Neo J701FXXSACUD2
SM-J701F 16 countries Android 9 (Pie)

Samsung Galaxy J7 Neo J701FXXSACUD2 Firmware

Samsung Galaxy J7 Neo J701FXXSACUD2 is an Android 9 (Pie) firmware for 16 countries, 17 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J701FXXSACUC3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J701F is available: J701FXXUACUH1.

Download firmware
9.1/10 (490)75,746 times
Android 9 (Pie)
OS Version
2021-04-27
First release
other regions until 2021-05-18
16
Countries
17
CSC codes
A (10)
Bootloader binary

Bootloader binary A (10). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-J701F
    AFG Afghanistan
    BTC, LYS Libya
    EGY Egypt
    MID Iraq
    +6 more countries
    MWD Morocco
    PAK Pakistan
    THR Iran
    TUN Tunisia
    XSG United Arab Emirates
    TKD
    		J701FOJVACUC2J701FXXSACUC1 2021-05-18 2021-05-11 2.338 GiB
    SM-J701F_1_20210427195037_5k6oa0ze9t_fac.zip
    		Download
    SM-J701F
    CAM Cambodia
    LAO Laos
    MYM Myanmar (Burma)
    THL Thailand
    +1 more country
    XTC Philippines
    		J701FOLBACUD2J701FXXSACUD2 2021-04-27 2021-04-27 2.363 GiB
    SM-J701F_1_20210407190636_qa4f1zdics_fac.zip
    		Download
    SM-J701F
    XID Indonesia
    		J701FOLEACUD2J701FXXSACUD2 2021-04-27 2021-04-27 2.235 GiB
    SM-J701F_1_20210408074436_tuhzy1lctb_fac.zip
    		Download

    No matching downloads

    How to flash J701FXXSACUD2

    • J701FXXSACUD2 has bootloader binary A (10). Your device must run binary A (10) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J701FXXSACUD2 by region

    First release
    April 27, 2021
    Last region
    May 18, 2021
    Duration
    22 days
    Regions
    17
    1. Day 1 · · 6 regions
      CambodiaCAMIndonesiaXIDLaosLAOMyanmar (Burma)MYMPhilippinesXTCThailandTHL
    2. Day 15 · · 1 region
      United Arab EmiratesXSG
    3. Day 22 · · 10 regions
      AfghanistanAFGEgyptEGYIranTHRIraqMIDLibyaBTCLYSMoroccoMWDPakistanPAKTunisiaTUNTKD

    Device specifications

    • Display diagonal14 cm (5.5")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • Processor frequency1.6 GHz
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity3500 mAh
    • Weight170 g

    Frequently Asked Questions

    J701FXXSACUD2 is Android 9 (Pie) firmware for Samsung Galaxy J7 Neo, released for 16 countries, 17 CSC codes. Samsung built it on 2021-04-27.

    No. A newer build for SM-J701F is available: J701FXXUACUH1. Install it instead of J701FXXSACUD2 unless you need this exact version. The previous build was J701FXXSACUC3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J7 Neo must be on bootloader binary A (10) or lower.

    This build uses bootloader binary A (10). It can be flashed on a Samsung Galaxy J7 Neo running binary A (10) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J7 Neo

    No changelog details available.
    Model firmware by region