SM-J701M 2 countries Android 9

Samsung Galaxy J7 Neo J701MUBU7CSH1 Firmware

Name: Samsung Galaxy J7 Neo (SM-J701M)
Brand: Samsung
Availability: InStock

Samsung Galaxy J7 Neo J701MUBU7CSH1 is an Android 9 firmware for Argentina (PSN), Chile (CHV). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J701MUBS7CSG2 https://samfirm.shop/build/J701MUBS7CSG2: Android updated from Android 9 (Pie) to Android 9. A newer build for SM-J701M is available: J701MUBUBCZC2 https://samfirm.shop/build/J701MUBUBCZC2.

9.1/10 (28)9,253 times

Android 9

OS Version

2019-08-12

First release

other regions until 2019-08-23

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 7. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J7 Neo use bootloader binary B (11) (latest: J701MUBUBCZC2). If your device already runs binary B (11), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: J701MUBU7CSH1

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-J701M	CHV Chile	J701MUWC7CSH3	2019-08-23	2019-09-12	2.321 GiB	SM-J701M_1_20200627024133_f2gkuxd8j0_fac.zip
SM-J701M	PSN Argentina	J701MPSN7CSH1	2019-08-23	2019-09-04	2.196 GiB	SM-J701M_1_20190823201942_di0dkrg2xd_fac.zip
SM-J701M	PSN Argentina	J701M7CSH1	2019-08-12	—	—	—

Device specifications

Launched withAndroid 7.0
Display diagonal14 cm (5.5")
Display resolution720 x 1280 pixels
Display typeSAMOLED
Processor frequency1.6 GHz
Processor familySamsung Exynos
Processor model7870
RAM2 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity3000 mAh
Weight170 g

How to flash J701MUBU7CSH1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J701MUBU7CSH1 has bootloader binary 7. Your device must run binary 7 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J701MUBU7CSH1 is Android 9 firmware for Samsung Galaxy J7 Neo, released for Argentina (PSN), Chile (CHV). Samsung built it on 2019-08-12.

No. A newer build for SM-J701M is available: J701MUBUBCZC2. Install it instead of J701MUBU7CSH1 unless you need this exact version. The previous build was J701MUBS7CSG2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J7 Neo must be on bootloader binary 7 or lower.

This build uses bootloader binary 7. It can be flashed on a Samsung Galaxy J7 Neo running binary 7 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.