SM-J730G 3 countries Android 9 (Pie)

Samsung Galaxy J7 Pro J730GUBSACTC1 Firmware

Name: Samsung Galaxy J7 Pro (SM-J730G)
Brand: Samsung
Availability: InStock

Samsung Galaxy J7 Pro J730GUBSACTC1 is an Android 9 (Pie) firmware for Brazil (ZTA), Colombia (COM), Ecuador (ECO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J730GUBS9CTB1 https://samfirm.shop/build/J730GUBS9CTB1: bootloader binary raised from 9 to A (10), so after installing it there is no way back to older builds. A newer build for SM-J730G is available: J730GUBUDCUG1 https://samfirm.shop/build/J730GUBUDCUG1.

8.9/10 (477)25,523 times

Android 9 (Pie)

OS Version

2020-03-12

First release

other regions until 2020-03-20

n/a

Security patch

Countries

CSC codes

A (10)

Bootloader binary

Bootloader binary A (10). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J7 Pro use bootloader binary D (13) (latest: J730GUBUDCUG1). If your device already runs binary D (13), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: J730GUBSACTC1

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-J730G	COM Colombia	J730GCOMACTC1	2020-03-20	2020-03-27	2.265 GiB	SM-J730G_1_20210713061638_t3r9n0xrtc_fac.zip
SM-J730G	COM Colombia	J730GACTC1	2020-03-12	—	—	—
SM-J730G	ECO Ecuador	J730GECOACTC1	2020-03-20	2020-03-27	2.291 GiB	SM-J730G_1_20211113065200_4dj18qw7xo_fac.zip
SM-J730G	ECO Ecuador	J730GACTC1	2020-03-12	—	—	—
SM-J730G	ZTA Brazil	J730GZTAACTC1	2020-03-20	2020-03-27	2.286 GiB	SM-J730G_1_20210713055510_h9lrpg8e4s_fac.zip
SM-J730G	ZTA Brazil	J730GACTC1	2020-03-12	—	—	—

Device specifications

Display diagonal14 cm (5.5")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
Processor frequency1.6 GHz
RAM3 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
SIM cardsDual SIM
Battery capacity3600 mAh
Weight181 g

How to flash J730GUBSACTC1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J730GUBSACTC1 has bootloader binary A (10). Your device must run binary A (10) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J730GUBSACTC1 is Android 9 (Pie) firmware for Samsung Galaxy J7 Pro, released for Brazil (ZTA), Colombia (COM), Ecuador (ECO). Samsung built it on 2020-03-12.

No. A newer build for SM-J730G is available: J730GUBUDCUG1. Install it instead of J730GUBSACTC1 unless you need this exact version. The previous build was J730GUBS9CTB1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J7 Pro must be on bootloader binary A (10) or lower.

This build uses bootloader binary A (10). It can be flashed on a Samsung Galaxy J7 Pro running binary A (10) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.