Samsung Galaxy J7 Pro J730GUBSDCUC6
SM-J730G 11 countries Android 9 (Pie)

Samsung Galaxy J7 Pro J730GUBSDCUC6 Firmware

Samsung Galaxy J7 Pro J730GUBSDCUC6 is an Android 9 (Pie) firmware for 11 countries, 13 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J730GUBSDCUC5, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J730G is available: J730GUBUDCUG1.

Download firmware
8.8/10 (487)57,219 times
Android 9 (Pie)
OS Version
2021-04-15
First release
other regions until 2021-05-25
11
Countries
13
CSC codes
D (13)
Bootloader binary

Bootloader binary D (13). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    6
    MODEM/CP Version: J730GUBSDCUC1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J730G
    ALE Ecuador
    DOO Dominican Republic
    TPA Panama
    TTT Trinidad & Tobago
    +1 more country
    UPO, UYO Uruguay
    		J730GUUBDCUC1 2021-05-04 2021-04-15 1.925 GiB
    SM-J730G_1_20210402035736_ysg0urqq8y_fac.zip
    		Download
    SM-J730G
    BAT Mexico
    CWW Jamaica
    ICE Costa Rica
    		J730GUWEDCUC1 2021-04-30 2021-04-28 2.016 GiB
    SM-J730G_1_20210409061536_uxbehq9b5z_fac.zip
    		Download
    SM-J730G
    DOR Dominican Republic
    		J730GDORDCUC1 2021-05-25 2021-05-25 1.872 GiB
    SM-J730G_1_20210409060736_3za4f2gmlo_fac.zip
    		Download
    SM-J730G
    NBS Nicaragua
    		J730GNBSDCUC1 2021-05-25 2021-05-25 1.984 GiB
    SM-J730G_1_20210409060336_xtxplf0gzy_fac.zip
    		Download
    SM-J730G
    PSP Argentina
    		J730GPSPDCUC1 2021-04-30 2021-05-01 1.839 GiB
    SM-J730G_1_20210409061136_ouqiw113vq_fac.zip
    		Download
    SM-J730G
    ZTO Brazil
    		J730GZTODCUC1 2021-04-15 2021-04-15 1.808 GiB
    SM-J730G_1_20210402035706_7iu4j4mqr5_fac.zip
    		Download

    No matching downloads

    How to flash J730GUBSDCUC6

    • J730GUBSDCUC6 has bootloader binary D (13). Your device must run binary D (13) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J730GUBSDCUC6 by region

    First release
    April 15, 2021
    Last region
    May 25, 2021
    Duration
    41 days
    Regions
    13
    1. Day 1 · · 2 regions
      BrazilZTOPanamaTPA
    2. Day 6 · · 2 regions
      Dominican RepublicDOOUruguayUPO
    3. Day 9 · · 2 regions
      Trinidad & TobagoTTTUruguayUYO
    4. Day 14 · · 1 region
      Costa RicaICE
    5. Day 17 · · 3 regions
      ArgentinaPSPJamaicaCWWMexicoBAT
    6. Day 20 · · 1 region
      EcuadorALE
    7. Day 41 · · 2 regions
      Dominican RepublicDORNicaraguaNBS

    Device specifications

    • Display diagonal14 cm (5.5")
    • Display resolution1920 x 1080 pixels
    • Display typeSAMOLED
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity3600 mAh
    • Weight181 g

    Frequently Asked Questions

    J730GUBSDCUC6 is Android 9 (Pie) firmware for Samsung Galaxy J7 Pro, released for 11 countries, 13 CSC codes. Samsung built it on 2021-04-15.

    No. A newer build for SM-J730G is available: J730GUBUDCUG1. Install it instead of J730GUBSDCUC6 unless you need this exact version. The previous build was J730GUBSDCUC5.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J7 Pro must be on bootloader binary D (13) or lower.

    This build uses bootloader binary D (13). It can be flashed on a Samsung Galaxy J7 Pro running binary D (13) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 11 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J7 Pro

    No changelog details available.
    Model firmware by region