Samsung Galaxy M20 M205NKSU4BTH3
SM-M205N 1 country Android 10

Samsung Galaxy M20 M205NKSU4BTH3 Firmware

Samsung Galaxy M20 M205NKSU4BTH3 is an Android 10 firmware for South Korea (KOO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build M205NKSU3BTE2: bootloader binary raised from 3 to 4, so after installing it there is no way back to older builds. A newer build for SM-M205N is available: M205NKSU7BVG3.

Download firmware
9.0/10 (483)8,778 times
Android 10
OS Version
2020-08-18
First release
other regions until 2020-08-19
1
Countries
1
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy M20 use bootloader binary 7 (latest: M205NKSU7BVG3). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-M205N
    KOO South Korea
    		M205NKOO4BTH3M205NKOU4BTH1 2020-08-19 2020-08-24 2.437 GiB
    SM-M205N_1_20220725082301_szaavdq084_fac.zip
    		Download
    SM-M205N
    KOO South Korea
    		M205N4BTH3M205NKSU4BTH3 2020-08-18 — — — Download

    No matching downloads

    How to flash M205NKSU4BTH3

    • M205NKSU4BTH3 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal16 cm (6.3")
    • Display resolution1080 x 2340 pixels
    • Display typeTFT
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeDual camera
    • Battery capacity5000 mAh
    • Weight186 g

    Specifications of SM-M205F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    M205NKSU4BTH3 is Android 10 firmware for Samsung Galaxy M20, released for South Korea (KOO). Samsung built it on 2020-08-18.

    No. A newer build for SM-M205N is available: M205NKSU7BVG3. Install it instead of M205NKSU4BTH3 unless you need this exact version. The previous build was M205NKSU3BTE2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.437 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy M20 must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy M20 running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy M20

    No changelog details available.
    Model firmware by region