Samsung Galaxy M20 M205NKSU7BVG2

Samsung Galaxy M20 M205NKSU7BVG2 Firmware

Samsung Galaxy M20 M205NKSU7BVG2 is an Android 10 firmware for South Korea (KOO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build M205NKSS7BVA2 https://samfirm.shop/build/M205NKSS7BVA2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-M205N is available: M205NKSU7BVG3 https://samfirm.shop/build/M205NKSU7BVG3.

Download firmware
8.9/10 (36)341 times
Android 10
OS Version
2022-07-06
Build Date
1
Countries
1
CSC codes
7
Bootloader binary

Bootloader binary 7. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: M205NKOU7BVG2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-M205N
    KOO South Korea
    M205NKOO7BVG2 2022-07-13 2.438 GiB
    SM-M205N_1_20220706145911_4afdegfja9_fac.zip

    No matching downloads

    How to flash M205NKSU7BVG2

    • M205NKSU7BVG2 has bootloader binary 7. Your device must run binary 7 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal16 cm (6.3")
    • Display resolution1080 x 2340 pixels
    • Display typeTFT
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeDual camera
    • Battery capacity5000 mAh
    • Weight186 g

    Specifications of SM-M205F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    M205NKSU7BVG2 is Android 10 firmware for Samsung Galaxy M20, released for South Korea (KOO). Samsung built it on 2022-07-06.

    No. A newer build for SM-M205N is available: M205NKSU7BVG3. Install it instead of M205NKSU7BVG2 unless you need this exact version. The previous build was M205NKSS7BVA2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.438 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy M20 must be on bootloader binary 7 or lower.

    This build uses bootloader binary 7. It can be flashed on a Samsung Galaxy M20 running binary 7 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy M20

    https://samfirm.shop/build/M205NKSU7BVG3
    No changelog details available.