Samsung Galaxy Note4 N910CXXS2DRI2
SM-N910C 1 country Android 6.0.1 (Marshmallow)

Samsung Galaxy Note4 N910CXXS2DRI2 Firmware

Samsung Galaxy Note4 N910CXXS2DRI2 is an Android 6.0.1 (Marshmallow) firmware for Poland (XEO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N910CXXU2DRG5, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-N910C is available: N910CXXU2DSC1.

Download firmware
9.4/10 (454)8,863 times
Android 6.0.1 (Marshmallow)
OS Version
2018-09-21
First release
other regions until 2018-12-04
n/a
Security patch
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-N910C
    XEO Poland
    		N910COXA2DQK1N910CXXU1DQG1 2018-12-04 2018-12-04 2.076 GiB
    SM-N910C_1_20181204142753_cvm28fjyqu_fac.zip
    SM-N910C
    XEO Poland
    		N910COXA2DQK1N910CXXS2DRI2 2018-09-21 — — —

    No matching downloads

    How to flash N910CXXS2DRI2

    • N910CXXS2DRI2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency1.9 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3220 mAh
    • Weight176 g

    Frequently Asked Questions

    N910CXXS2DRI2 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy Note4, released for Poland (XEO). Samsung built it on 2018-09-21.

    No. A newer build for SM-N910C is available: N910CXXU2DSC1. Install it instead of N910CXXS2DRI2 unless you need this exact version. The previous build was N910CXXU2DRG5.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.076 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Note4 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Note4 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 154 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note4

    No changelog details available.

    ·Battery usage optimisation
    ·Improved performance with efficient memory management
    ·Security Enhancements
    ·Improved the stability
    ·After updating, you will not be able to downgrade to the old software because of updates to the security policy.

    No changelog details available.
    Model firmware by region