Samsung Galaxy Watch6 R930XXU1AWH4
SM-R930 17 countries Wear OS 5

Samsung Galaxy Watch6 R930XXU1AWH4 Firmware

First release:

Samsung Galaxy Watch6 R930XXU1AWH4 is an Wear OS 5 firmware for 17 countries, 17 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-R930 is available: R930XXS2CZF5.

Download firmware
9.1 (21)3,196 times
Wear OS 5
OS Version
2023-08-17
First release
other regions until 2023-09-05
2023-06-01
Security patch
17
Countries
17
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Watch6 use bootloader binary 2 (latest: R930XXS2CZF5). If your device already runs binary 2, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: R930XXU1AWH4
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-R930
    ACR Saudi Arabia
    AFR Kenya
    ARO Argentina
    ATO Austria
    +12 more countries
    AUT Switzerland
    BGL Bulgaria
    BNG Bangladesh
    BRI Taiwan
    BTU United Kingdom
    BVO Bolivia
    CAC Uzbekistan
    KOO South Korea
    XAA United States
    XSE Indonesia
    XXV Vietnam
    ZTO Brazil
    		R930OXM1AWH4 2023-08-17 2023-08-21 3.341 GiB
    SM-R930_1_20230817141650_bu4ibv1leq_fac.zip
    		Download
    SM-R930
    XJP Japan
    		R930SJP1AWH4 2023-09-05 2023-09-05 3.214 GiB
    SM-R930_1_20230905091820_o9q4ipqmts_fac.zip
    		Download

    No matching downloads

    How to flash R930XXU1AWH4

    • R930XXU1AWH4 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in R930XXU1AWH4

    • Stability and reliability
    The stability has been improved.

    Rollout of R930XXU1AWH4 by region

    First release
    August 21, 2023
    Last region
    September 5, 2023
    Duration
    16 days
    Regions
    16
    1. Day 1 · · 1 region
      United StatesXAA
    2. Day 2 · · 14 regions
      ArgentinaAROAustriaATOBangladeshBNGBoliviaBVOBrazilZTOBulgariaBGLIndonesiaXSEKenyaAFRSaudi ArabiaACRSwitzerlandAUTTaiwanBRIUnited KingdomBTU
      +2 more countries
      UzbekistanCACVietnamXXV
    3. Day 16 · · 1 region
      JapanXJP

    Device specifications

    • Launched withWear OS
    • Battery capacity300 mAh
    • Weight28.7 g
    • Waterproof up to50 m
    • Band colourBlack

    Specifications of SM-R930N, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    R930XXU1AWH4 is Wear OS 5 firmware for Samsung Galaxy Watch6, released for 17 countries, 17 CSC codes. It includes the 2023-06-01 security patch. Samsung built it on 2023-08-17.

    No. A newer build for SM-R930 is available: R930XXS2CZF5. Install it instead of R930XXU1AWH4 unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Watch6 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Watch6 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 22 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Watch6

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Show 11 older builds

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.
    One UI 8 Watch Upgrade
    Get things done

    Stay on top of important tasks with the Now bar
    Check the information you need right now and start essential features straight from your watch face. Ongoing tasks will appear in the Now bar at the bottom of your watch face so you can check key information quickly.

    Do more with double pinch
    Just pinch your thumb and index finger together twice to scroll through notifications, control music, take pictures, and more. You can also customize what happens wh...

    Model firmware by region

    New firmware for other devices

    All latest builds