SM-S135DL 2 countries Android 13

Samsung Galaxy A03s S135DLUDU3AWJ3 Firmware

Samsung Galaxy A03s S135DLUDU3AWJ3 is an Android 13 firmware for TFV, United States (TFN). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S135DLUDS2AWI1: bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds; security patch 2023-09-01 instead of 2023-07-01. A newer build for SM-S135DL is available: S135DLUDS8AYI1.

Download firmware
9.0/10 (479)6,712 times
Android 13
OS Version
2023-11-02
Build Date
2023-09-01
Security patch
2
Countries
2
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A03s use bootloader binary 8 (latest: S135DLUDS8AYI1). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: S135DLUDU3AWJ3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-S135DL
    TFN United States
    TFV
    		S135DLTFN3AWJ3 2023-11-02 4.075 GiB
    SM-S135DL_1_20231018145110_r53qrx2gzy_fac.zip
    		Download

    No matching downloads

    How to flash S135DLUDU3AWJ3

    • S135DLUDU3AWJ3 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in S135DLUDU3AWJ3

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Rollout of S135DLUDU3AWJ3 by region

    Samsung released this build in all regions (2) on the same day, November 2, 2023.

    Frequently Asked Questions

    S135DLUDU3AWJ3 is Android 13 firmware for Samsung Galaxy A03s, released for TFV, United States (TFN). It includes the 2023-09-01 security patch. Samsung built it on 2023-11-02.

    No. A newer build for SM-S135DL is available: S135DLUDS8AYI1. Install it instead of S135DLUDU3AWJ3 unless you need this exact version. The previous build was S135DLUDS2AWI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 4.075 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A03s must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy A03s running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 3.

    Other builds and changelog for Samsung Galaxy A03s

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • The security of your device has been improved.

    · The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • The security of your device has been improved.

    Show 1 older build
    No changelog details available.
    Model firmware by region