Samsung Galaxy mini 2 S6500DXLH1
GT-S6500 1 country Android 2.3.6 (Gingerbread)

Samsung Galaxy mini 2 S6500DXLH1 Firmware

Samsung Galaxy mini 2 S6500DXLH1 is an Android 2.3.6 (Gingerbread) firmware for Singapore (XSP). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S6500BUMD1: bootloader binary raised from B (11) to D (13), so after installing it there is no way back to older builds. A newer build for GT-S6500 is available: S6500XXNI2.

Download firmware
9.0/10 (483)3,356 times
Android 2.3.6 (Gingerbread)
OS Version
2012-08-06
Build Date
1
Countries
1
CSC codes
D (13)
Bootloader binary

Bootloader binary D (13). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy mini 2 use bootloader binary X (33) (latest: S6500XXNI2). If your device already runs binary X (33), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: S6500DXLH1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    GT-S6500
    XSP Singapore
    		S6500OLBLH1 2012-08-20 234.733 MiB
    GT-S6500_XSP_1_20120806160453_hmofrvma3q.zip
    		Download

    No matching downloads

    How to flash S6500DXLH1

    • S6500DXLH1 has bootloader binary D (13). Your device must run binary D (13) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 2.3
    • Display diagonal8.31 cm (3.27")
    • Display resolution320 x 480 pixels
    • Display typeTFT
    • Processor frequency0.8 GHz
    • Processor familyARM
    • RAM0.5 GB
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1300 mAh
    • Weight105 g

    Frequently Asked Questions

    S6500DXLH1 is Android 2.3.6 (Gingerbread) firmware for Samsung Galaxy mini 2, released for Singapore (XSP). Samsung built it on 2012-08-06.

    No. A newer build for GT-S6500 is available: S6500XXNI2. Install it instead of S6500DXLH1 unless you need this exact version. The previous build was S6500BUMD1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 234.733 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy mini 2 must be on bootloader binary D (13) or lower.

    This build uses bootloader binary D (13). It can be flashed on a Samsung Galaxy mini 2 running binary D (13) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy mini 2

    No changelog details available.
    Model firmware by region