Samsung Galaxy mini 2 S6500XXNI2
GT-S6500 1 country Android 2.3.6 (Gingerbread)

Samsung Galaxy mini 2 S6500XXNI2 Firmware

Samsung Galaxy mini 2 S6500XXNI2 is an Android 2.3.6 (Gingerbread) firmware for Netherlands (XEN). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S6500XXMK1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for GT-S6500.

Download firmware
9.4/10 (460)8,672 times
Android 2.3.6 (Gingerbread)
OS Version
2014-09-26
Build Date
1
Countries
1
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    GT-S6500
    XEN Netherlands
    		S6500NE1S6500XXNI2 — — — Download
    GT-S6500
    XEN Netherlands
    		S6500XENNE1S6500XXNF1 2014-11-17 — — Download

    No matching downloads

    How to flash S6500XXNI2

    • S6500XXNI2 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 2.3
    • Display diagonal8.31 cm (3.27")
    • Display resolution320 x 480 pixels
    • Display typeTFT
    • Processor frequency0.8 GHz
    • Processor familyARM
    • RAM0.5 GB
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1300 mAh
    • Weight105 g

    Frequently Asked Questions

    S6500XXNI2 is Android 2.3.6 (Gingerbread) firmware for Samsung Galaxy mini 2, released for Netherlands (XEN). Samsung built it on 2014-09-26.

    Yes. S6500XXNI2 is the newest build for GT-S6500 on SamFirm. The previous build was S6500XXMK1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy mini 2 must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy mini 2 running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy mini 2

    No changelog details available.
    Model firmware by region