GT-S6790 2 countries Android 4.1.2 (Jelly)

Samsung Galaxy FAME Lite S6790XXAMJ1 Firmware

Name: Samsung Galaxy FAME Lite (GT-S6790)
Brand: Samsung
Availability: InStock

Samsung Galaxy FAME Lite S6790XXAMJ1 is an Android 4.1.2 (Jelly) firmware for Morocco (MAT, MWD), South Africa (XFA, XFV). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S6790XXAMI3: Android updated from Jelly(Android Bean) to Android 4.1.2 (Jelly). A newer build for GT-S6790 is available: S6790XXANJ1.

9.2/10 (27)13,184 times

Android 4.1.2 (Jelly)

OS Version

2013-10-29

First release

other regions until 2015-09-25

n/a

Security patch

Countries

CSC codes

X (33)

Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: S6790XXAMI1

Model	Region	CSC Version	Build Date	Release date	Size	File name
GT-S6790	MAT Morocco	S6790OJVAMK3	2013-10-29	2013-12-18	—	—
GT-S6790	MWD Morocco XFV South Africa	S6790OJVAMK3	2015-09-25	2014-05-15	590.111 MiB	GT-S6790_1_20150925140413_ncl5vg7rsu_fac.zip
GT-S6790	XFA South Africa	S6790OJVAMK3	2013-10-29	—	603.222 MiB	GT-S6790_1_20151110161852_d807plwnnq_fac.zip

Device specifications

Launched withAndroid 4.1
Display diagonal8.89 cm (3.5")
Display resolution480 x 320 pixels
Display typeTFT
Processor frequency0.85 GHz
Rear camera resolution3 MP
Rear camera typeSingle camera
Battery capacity1300 mAh
Weight118 g

How to flash S6790XXAMJ1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

S6790XXAMJ1 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

S6790XXAMJ1 is Android 4.1.2 (Jelly) firmware for Samsung Galaxy FAME Lite, released for Morocco (MAT, MWD), South Africa (XFA, XFV). Samsung built it on 2013-10-29.

No. A newer build for GT-S6790 is available: S6790XXANJ1. Install it instead of S6790XXAMJ1 unless you need this exact version. The previous build was S6790XXAMI3.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy FAME Lite must be on bootloader binary X (33) or lower.

This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy FAME Lite running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 4 other builds of this model use the same binary, so you can switch between them in both directions.