Samsung Galaxy FAME Lite S6790XXAMI2
GT-S6790 2 countries Android 4.1.2 (Jelly)

Samsung Galaxy FAME Lite S6790XXAMI2 Firmware

Samsung Galaxy FAME Lite S6790XXAMI2 is an Android 4.1.2 (Jelly) firmware for Iraq (MID), Morocco (FWD). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S6790XWAOB1: Android updated from Jelly(Android Bean) to Android 4.1.2 (Jelly); bootloader binary raised from W (32) to X (33), so after installing it there is no way back to older builds. A newer build for GT-S6790 is available: S6790XXANJ1.

Download firmware
9.4/10 (477)12,983 times
Android 4.1.2 (Jelly)
OS Version
2013-09-09
Build Date
2
Countries
2
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: S6790XXAMI1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    GT-S6790
    FWD Morocco
    		S6790OJVAMI3 2013-09-09 — — — Download
    GT-S6790
    FWD Morocco
    		S6790OJVAMJ1 — 2014-06-17 — — Download
    GT-S6790
    MID Iraq
    		S6790OJVAMI3 2013-09-09 2013-11-27 — — Download

    No matching downloads

    How to flash S6790XXAMI2

    • S6790XXAMI2 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of S6790XXAMI2 by region

    First release
    November 27, 2013
    Last region
    June 17, 2014
    Duration
    203 days
    Regions
    2
    1. Day 1 · · 1 region
      IraqMID
    2. Day 203 · · 1 region
      MoroccoFWD

    Device specifications

    • Launched withAndroid 4.1
    • Display diagonal8.89 cm (3.5")
    • Display resolution480 x 320 pixels
    • Display typeTFT
    • Processor frequency0.85 GHz
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • Battery capacity1300 mAh
    • Weight118 g

    Frequently Asked Questions

    S6790XXAMI2 is Android 4.1.2 (Jelly) firmware for Samsung Galaxy FAME Lite, released for Iraq (MID), Morocco (FWD). Samsung built it on 2013-09-09.

    No. A newer build for GT-S6790 is available: S6790XXANJ1. Install it instead of S6790XXAMI2 unless you need this exact version. The previous build was S6790XWAOB1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy FAME Lite must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy FAME Lite running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 4 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy FAME Lite

    No changelog details available.
    Model firmware by region