Samsung Galaxy Tab Plus 7.0 T116BUUBU0APL1 Firmware
Samsung Galaxy Tab Plus 7.0 T116BUUBU0APL1 is an Android 4.4.4 (KitKat) firmware for 7 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T116BUUBU0API1 https://samfirm.shop/build/T116BUUBU0API1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T116BU is available: T116BUUBU0ARE1 https://samfirm.shop/build/T116BUUBU0ARE1.
Android 4.4.4 (KitKat)
OS Version
2016-11-30
First release
other regions until 2017-01-31
7
Countries
9
CSC codes
0
Bootloader binary
Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
10
MODEM/CP Version: T116BUUBU0APL1
| Model | Region | CSC Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|
| SM-T116BU |
CHO Chile | T116BUUUB0APL1 | 2016-11-30 | 2017-01-06 | 801.869 MiB | SM-T116BU_1_20180626094553_7v5i1v9s2u_fac.zip | Download |
| SM-T116BU |
COO Colombia
EON Trinidad & Tobago
TPA Panama | T116BUUUB0APL1 | 2016-11-30 | 2016-12-16 | 801.866 MiB | SM-T116BU_1_20180327111414_e8eg1o5fzo_fac.zip | Download |
| SM-T116BU |
CTU Uruguay | T116BUUWA0APL1 | 2016-11-30 | 2017-02-02 | 939.041 MiB | SM-T116BU_1_20170406102226_dzkfpzue4m_fac.zip | Download |
| SM-T116BU |
PNT Peru | T116BU0APL1 | 2016-11-30 | — | — | — | Download |
| SM-T116BU |
PNT Peru | T116BUPNT0APL1 | 2016-11-30 | 2017-01-24 | 790.593 MiB | SM-T116BU_1_20170314102739_o1jdc3t3s3_fac.zip | Download |
| SM-T116BU |
ZTA Brazil | T116BU0APL1 | 2016-11-30 | — | — | — | Download |
| SM-T116BU |
ZTA Brazil | T116BUZTA0APL1 | 2016-11-30 | 2017-01-16 | 943.316 MiB | SM-T116BU_1_20180706085853_wmvo2iyi96_fac.zip | Download |
| SM-T116BU |
ZTM Brazil | T116BUZTM0APL1 | 2017-01-31 | 2017-02-01 | 981.429 MiB | SM-T116BU_1_20170131190939_ibn1ldlakv_fac.zip | Download |
| SM-T116BU |
ZTM Brazil | T116BU0APL1 | 2016-11-30 | — | — | — | Download |
| SM-T116BU |
ZTO Brazil | T116BU0APL1 | 2016-11-30 | — | — | — | Download |
No matching downloads
How to flash T116BUUBU0APL1
- T116BUUBU0APL1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of T116BUUBU0APL1 by region
- First release
- December 16, 2016
- Last region
- February 2, 2017
- Duration
- 49 days
- Regions
- 8
- Day 1 · · 1 regionPanamaTPA
- Day 6 · · 1 regionColombiaCOO
- Day 7 · · 1 regionTrinidad & TobagoEON
- Day 22 · · 1 regionChileCHO
- Day 32 · · 1 regionBrazilZTA
- Day 40 · · 1 regionPeruPNT
- Day 48 · · 1 regionBrazilZTM
- Day 49 · · 1 regionUruguayCTU
Device specifications
- Display diagonal17.8 cm (7")
- Display resolution1024 x 600 pixels
- Processor frequency1.3 GHz
- Rear camera resolution2 MP
- Rear camera typeSingle camera
- Front camera resolution2 MP
- Weight322 g
Frequently Asked Questions
T116BUUBU0APL1 is Android 4.4.4 (KitKat) firmware for Samsung Galaxy Tab Plus 7.0, released for 7 countries, 9 CSC codes. Samsung built it on 2016-11-30.
No. A newer build for SM-T116BU is available: T116BUUBU0ARE1. Install it instead of T116BUUBU0APL1 unless you need this exact version. The previous build was T116BUUBU0API1.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab Plus 7.0 must be on bootloader binary 0 or lower.
This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab Plus 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 19 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy Tab Plus 7.0
No changelog details available.
- T116BUUBU0ARE1May 2, 2018
- T116BUUBU0ARC2Mar 5, 2018
- T116BUUBU0AQK1Oct 31, 2017
- T116BUUBU0AQB3Feb 13, 2017
- T116BUUBS0AQB2Feb 10, 2017
- T116BUUBS0AQA1Jan 16, 2017
- T116BUUBU0APL1Nov 30, 2016
- T116BUUBU0API1Sep 12, 2016
- T116BUUBU0APH3Aug 25, 2016
- T116BUUBU0APF1May 31, 2016
- T116BUUBU0APC2Mar 9, 2016
- T116BUUBU0APC1Mar 2, 2016
- T116BUUBU0AOJ2Oct 16, 2015
- T116BUUBU0AOJ1Oct 1, 2015
- T116BUUBU0AOH1Aug 26, 2015
- T116BUUBU0AOG1Jul 17, 2015
- T116BUDXU0AOE1May 4, 2015
- T116BUUBU0AOC3Mar 23, 2015
- T116BUDXU0AOC1Mar 6, 2015
- T116BUUBU0AOC1Mar 5, 2015