Samsung Galaxy Tab A 7.0 T285XXS0ARI1
SM-T285 1 country Android 5.1.1 (Lollipop)

Samsung Galaxy Tab A 7.0 T285XXS0ARI1 Firmware

Samsung Galaxy Tab A 7.0 T285XXS0ARI1 is an Android 5.1.1 (Lollipop) firmware for Portugal (TPH). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T285XXU0ARB1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T285 is available: T285XXU0ATH1.

Download firmware
9.0/10 (460)8,993 times
Android 5.1.1 (Lollipop)
OS Version
2018-09-28
First release
other regions until 2018-12-13
1
Countries
1
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-T285
    TPH Portugal
    		T285OXX0AQL3T285XXU0AQH1 2018-12-13 2018-12-13 1.042 GiB
    SM-T285_1_20181213143914_jhp0t129rg_fac.zip
    		Download
    SM-T285
    TPH Portugal
    		T285OXX0AQL3T285XXS0ARI1 2018-09-28 — — — Download

    No matching downloads

    How to flash T285XXS0ARI1

    • T285XXS0ARI1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1280 x 720 pixels
    • Processor frequency1.5 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight289 g

    Frequently Asked Questions

    T285XXS0ARI1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab A 7.0, released for Portugal (TPH). Samsung built it on 2018-09-28.

    No. A newer build for SM-T285 is available: T285XXU0ATH1. Install it instead of T285XXS0ARI1 unless you need this exact version. The previous build was T285XXU0ARB1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.042 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A 7.0 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab A 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 44 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A 7.0

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region