Samsung Galaxy Tab A 7.0 T285XXU0ARB1
SM-T285 13 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab A 7.0 T285XXU0ARB1 Firmware

Samsung Galaxy Tab A 7.0 T285XXU0ARB1 is an Android 5.1.1 (Lollipop) firmware for 13 countries, 19 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T285DDU0AQL3: Android updated from Android 5.1.1 to Android 5.1.1 (Lollipop). A newer build for SM-T285 is available: T285XXU0ATH1.

Download firmware
8.8/10 (475)87,195 times
Android 5.1.1 (Lollipop)
OS Version
2018-02-08
First release
other regions until 2018-10-09
13
Countries
19
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    4
    MODEM/CP Version: T285XXU0AQD1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T285
    ACR, WTL Saudi Arabia
    AFR, DKR Kenya
    BTC, LYS Libya
    ECT Nigeria
    +9 more countries
    EGY Egypt
    MID Iraq
    MWD Morocco
    PAK Pakistan
    THR Iran
    TMC Algeria
    TUN Tunisia
    XFE South Africa
    XSG United Arab Emirates
    		T285OJV0ARB1 2018-04-17 2018-03-13 1.055 GiB
    SM-T285_1_20180313084127_hcygho38hp_fac.zip
    SM-T285
    KSA Saudi Arabia
    		T285OJV0ARB1, T285OJV0ARG2 2018-02-08 2018-04-06 1.055 GiB
    SM-T285_1_20180801105653_myihkp3klw_fac.zip
    SM-T285
    XFA South Africa
    		T285OJV0ARI1 2018-10-09 2018-10-09 1.055 GiB
    SM-T285_1_20181009083114_lwb2ngcpk8_fac.zip
    SM-T285
    XFV South Africa
    		T285XFV0AQC1 — — — —

    No matching downloads

    How to flash T285XXU0ARB1

    • T285XXU0ARB1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T285XXU0ARB1 by region

    First release
    March 13, 2018
    Last region
    October 9, 2018
    Duration
    211 days
    Regions
    18
    1. Day 1 · · 1 region
      United Arab EmiratesXSG
    2. Day 2 · · 1 region
      KenyaAFR
    3. Day 25 · · 3 regions
      EgyptEGYMoroccoMWDSaudi ArabiaKSA
    4. Day 28 · · 2 regions
      NigeriaECTSaudi ArabiaACR
    5. Day 30 · · 4 regions
      IranTHRIraqMIDPakistanPAKSouth AfricaXFE
    6. Day 32 · · 3 regions
      KenyaDKRLibyaBTCLYS
    7. Day 36 · · 3 regions
      AlgeriaTMCSaudi ArabiaWTLTunisiaTUN
    8. Day 211 · · 1 region
      South AfricaXFA

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1280 x 720 pixels
    • Processor frequency1.5 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight289 g

    Frequently Asked Questions

    T285XXU0ARB1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab A 7.0, released for 13 countries, 19 CSC codes. Samsung built it on 2018-02-08.

    No. A newer build for SM-T285 is available: T285XXU0ATH1. Install it instead of T285XXU0ARB1 unless you need this exact version. The previous build was T285DDU0AQL3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab A 7.0 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab A 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 44 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A 7.0

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region