Samsung Galaxy Tab A 7.0 T285XXU0APH4
SM-T285 https://samfirm.shop/model/SM-T285 14 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab A 7.0 T285XXU0APH4 Firmware

Samsung Galaxy Tab A 7.0 T285XXU0APH4 is an Android 5.1.1 (Lollipop) firmware for 14 countries, 16 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T285XXU0APF2 https://samfirm.shop/build/T285XXU0APF2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T285 is available: T285XXU0ATH1 https://samfirm.shop/build/T285XXU0ATH1.

8.7/10 (453)69,363 times
Android 5.1.1 (Lollipop)
OS Version
2016-08-24
Build Date
n/a
Security patch
14
Countries
16
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    16
    MODEM/CP Version: T285XXU0APH4
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T285
    AUT Switzerland
    T2850APE1 — — —
    SM-T285
    BTU United Kingdom
    T2850APH1 — — —
    SM-T285
    CAC Uzbekistan
    T285OXE0APK2 — — —
    SM-T285
    CAU Kazakhstan
    T285OXE0APK2 — — —
    SM-T285
    DBT Germany
    T2850APH1 — — —
    SM-T285
    ITV Italy
    T2850APH1 — — —
    SM-T285
    LUX Luxembourg
    T2850APH1 — — —
    SM-T285
    PHE Spain
    T2850APJ1 — — —
    SM-T285
    PHN Netherlands
    T2850APC2 — — —
    SM-T285
    SEB Baltic Europe
    T2850APE1 — — —
    SM-T285
    SEK Ukraine
    T285OXE0APK2 — — —
    SM-T285
    SER Russia
    T285OXE0APK2 — — —
    SM-T285
    SKZ Kazakhstan
    T285OXE0APK2 — — —
    SM-T285
    XEH Hungary
    T2850APC2 — — —
    SM-T285
    XEO Poland
    T285OXA0APH4 2016-09-08 1.025 GiB
    SM-T285_1_20181126110727_wkbwjud6pt_fac.zip
    SM-T285
    XEU United Kingdom
    T2850APH1 — — —

    No matching downloads

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1280 x 720 pixels
    • Processor frequency1.5 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight289 g

    How to flash T285XXU0APH4

    • T285XXU0APH4 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    T285XXU0APH4 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab A 7.0, released for 14 countries, 16 CSC codes. Samsung built it on 2016-08-24.

    No. A newer build for SM-T285 is available: T285XXU0ATH1. Install it instead of T285XXU0APH4 unless you need this exact version. The previous build was T285XXU0APF2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.025 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A 7.0 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab A 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 44 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A 7.0

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    Show 15 older builds
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.