SM-T331 6 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab4 8.0 T331XXS1BPL5 Firmware

Name: Samsung Galaxy Tab4 8.0 (SM-T331)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab4 8.0 T331XXS1BPL5 is an Android 5.1.1 (Lollipop) firmware for 6 countries, 6 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T331XXS1BPL4: Android updated from Android 5.1.1 (KitKat) to Android 5.1.1 (Lollipop). A newer build for SM-T331 is available: T331XXS1BSA2.

8.9/10 (24)31,143 times

Android 5.1.1 (Lollipop)

OS Version

2016-12-21

First release

other regions until 2017-01-17

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
SM-T331	ARO Argentina TPA Panama	T331UUB1BOL1	T331XXU1BOL1	2016-12-21	2017-01-17	1.192 GiB	SM-T331_1_20190115101853_y1ioucxh3i_fac.zip
SM-T331	BVO Bolivia COO Colombia TTT Trinidad & Tobago	T331UUB1BOL1	T331XXU1BOL1	2017-01-17	2017-01-17	1.192 GiB	SM-T331_1_20170117090726_z5hd3penws_fac.zip
SM-T331	BVO Bolivia	T331UUB1BOL1	T331XXS1BPL5	2016-12-21	—	—	—
SM-T331	COO Colombia	T331UUB1BOL1	T331XXS1BPL5	2016-12-21	—	—	—
SM-T331	TTT Trinidad & Tobago	T331UUB1BOL1	T331XXS1BPL5	2016-12-21	—	—	—
SM-T331	ZTO Brazil	T3311BOL1	T331XXS1BPL5	2016-12-21	—	—	—
SM-T331	ZTO Brazil	T331ZTO1BOL1	T331XXU1BOL1	2016-12-21	2017-01-10	1.243 GiB	SM-T331_1_20190115101414_hyaaah9cdw_fac.zip

Device specifications

Launched withAndroid
Display diagonal20.3 cm (8")
Display resolution1280 x 800 pixels
Processor frequency1.2 GHz
Rear camera resolution3 MP
Rear camera typeSingle camera
Front camera resolution1.3 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight323 g

How to flash T331XXS1BPL5

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T331XXS1BPL5 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T331XXS1BPL5 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab4 8.0, released for 6 countries, 6 CSC codes. Samsung built it on 2016-12-21.

No. A newer build for SM-T331 is available: T331XXS1BSA2. Install it instead of T331XXS1BPL5 unless you need this exact version. The previous build was T331XXS1BPL4.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab4 8.0 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab4 8.0 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 29 other builds of this model use the same binary, so you can switch between them in both directions.