Samsung Galaxy Tab4 8.0 T331XXS1BRL1 Firmware
Samsung Galaxy Tab4 8.0 T331XXS1BRL1 is an Android 4.4.2 (KitKat) firmware for 6 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T331XXS1BQD1 https://samfirm.shop/build/T331XXS1BQD1: Android updated from Android 5.1.1 (Lollipop) to Android 4.4.2 (KitKat). A newer build for SM-T331 is available: T331XXS1BSA2 https://samfirm.shop/build/T331XXS1BSA2.
Android 4.4.2 (KitKat)
OS Version
2018-12-06
First release
other regions until 2019-01-15
6
Countries
7
CSC codes
1
Bootloader binary
Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
| Model | Region | CSC Version | MODEM/CP Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|---|
| SM-T331 |
ARO Argentina
BVO Bolivia
COO Colombia
TPA Panama +1 more country
TTT Trinidad & Tobago | T331UUB1BRL1 | T331XXU1BOL1 | 2019-01-15 | 2019-01-15 | 1.192 GiB | SM-T331_1_20190115101853_y1ioucxh3i_fac.zip | Download |
| SM-T331 |
ARO Argentina | T331UUB1BRL1 | T331XXS1BRL1 | 2018-12-06 | — | — | — | Download |
| SM-T331 |
BVO Bolivia | T331UUB1BRL1 | T331XXS1BRL1 | 2018-12-06 | — | — | — | Download |
| SM-T331 |
COO Colombia | T331UUB1BRL1 | T331XXS1BRL1 | 2018-12-06 | — | — | — | Download |
| SM-T331 |
EON Trinidad & Tobago | T331UUB1BRL1 | T331XXU1BOL1 | — | — | — | — | Download |
| SM-T331 |
TPA Panama | T331UUB1BRL1 | T331XXS1BRL1 | 2018-12-06 | — | — | — | Download |
| SM-T331 |
TTT Trinidad & Tobago | T331UUB1BRL1 | T331XXS1BRL1 | 2018-12-06 | — | — | — | Download |
| SM-T331 |
ZTO Brazil | T331ZTO1BRL1 | T331XXU1BOL1 | 2019-01-15 | 2019-01-15 | 1.243 GiB | SM-T331_1_20190115101414_hyaaah9cdw_fac.zip | Download |
| SM-T331 |
ZTO Brazil | T3311BRL1 | T331XXS1BRL1 | 2018-12-06 | — | — | — | Download |
No matching downloads
How to flash T331XXS1BRL1
- T331XXS1BRL1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of T331XXS1BRL1 by region
Samsung released this build in all regions (6) on the same day, January 15, 2019.
Device specifications
- Launched withAndroid
- Display diagonal20.3 cm (8")
- Display resolution1280 x 800 pixels
- Processor frequency1.2 GHz
- Rear camera resolution3 MP
- Rear camera typeSingle camera
- Front camera resolution1.3 MP
- Wi-Fi standardWi-Fi 4 (802.11n)
- Weight323 g
Frequently Asked Questions
T331XXS1BRL1 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Tab4 8.0, released for 6 countries, 7 CSC codes. Samsung built it on 2018-12-06.
No. A newer build for SM-T331 is available: T331XXS1BSA2. Install it instead of T331XXS1BRL1 unless you need this exact version. The previous build was T331XXS1BQD1.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab4 8.0 must be on bootloader binary 1 or lower.
This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab4 8.0 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 29 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy Tab4 8.0
No changelog details available.
- T331XXS1BSA2Jan 10, 2019
- T331XXS1BSA1Jan 10, 2019
- T331XXS1BRL1Dec 6, 2018
- T331XXS1BQD1Apr 21, 2017
- T331XXS1BQC1Mar 24, 2017
- T331XXS1BQA2Jan 24, 2017
- T331XXS1BPL5Dec 21, 2016
- T331XXS1BPL4Dec 21, 2016
- T331XXS1BPL2Dec 8, 2016
- T331XXS1BPL1Feb 8, 2017
- T331XXU1BPH2Aug 29, 2016
- T331XXU1BPF6Jun 28, 2016
- T331XXU1BOL3Dec 14, 2015
- T331XXU1BOL2Dec 2, 2015
- T331XXU1BOJ1Oct 5, 2015
- T331XXU1BOG4Jul 9, 2015
- T331XXU1BOF9Jun 25, 2015
- T331XXS1AQA1Jan 12, 2017
- T331XXU1AOH5Aug 24, 2015
- T331XXU1AOH3Aug 19, 2015