Samsung Galaxy Tab4 8.0 T331XXU1BPH2
SM-T331 2 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab4 8.0 T331XXU1BPH2 Firmware

Samsung Galaxy Tab4 8.0 T331XXU1BPH2 is an Android 5.1.1 (Lollipop) firmware for Iran (THR), Saudi Arabia (KSA). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T331XXU1BPF6, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T331 is available: T331XXS1BSA2.

Download firmware
8.8/10 (477)8,695 times
Android 5.1.1 (Lollipop)
OS Version
2016-08-29
Build Date
2
Countries
2
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T331XXU1BOJ1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T331
    KSA Saudi Arabia
    THR Iran
    		T331OJV1BPH2 2016-09-14 1.276 GiB
    SM-T331_1_20190222104414_39xr7plipq_fac.zip
    		Download

    No matching downloads

    How to flash T331XXU1BPH2

    • T331XXU1BPH2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T331XXU1BPH2 by region

    Samsung released this build in all regions (2) on the same day, September 14, 2016.

    Device specifications

    • Launched withAndroid
    • Display diagonal20.3 cm (8")
    • Display resolution1280 x 800 pixels
    • Processor frequency1.2 GHz
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • Front camera resolution1.3 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight323 g

    Frequently Asked Questions

    T331XXU1BPH2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab4 8.0, released for Iran (THR), Saudi Arabia (KSA). Samsung built it on 2016-08-29.

    No. A newer build for SM-T331 is available: T331XXS1BSA2. Install it instead of T331XXU1BPH2 unless you need this exact version. The previous build was T331XXU1BPF6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.276 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab4 8.0 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab4 8.0 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 29 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab4 8.0

    No changelog details available.
    Model firmware by region