Samsung Galaxy Tab A T515NKSU3ASK4
SM-T515N 1 country Android 9 (Pie)

Samsung Galaxy Tab A T515NKSU3ASK4 Firmware

Samsung Galaxy Tab A T515NKSU3ASK4 is an Android 9 (Pie) firmware for South Korea (KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T515NKSU2ASI3: bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds. A newer build for SM-T515N is available: T515NKSU8CVG4.

Download firmware
9.3/10 (477)13,082 times
Android 9 (Pie)
OS Version
2019-11-26
First release
other regions until 2019-11-28
1
Countries
3
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A use bootloader binary 8 (latest: T515NKSU8CVG4). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-T515N
    KTC South Korea
    		T515NOKR3ASK4T515NKOU3ASK4 2019-11-28 2020-01-02 3.913 GiB
    SM-T515N_1_20210407125835_xskyz6rcqx_fac.zip
    		Download
    SM-T515N
    LUC South Korea
    		T515NOKR3ASK4T515NKOU3ASK4 2019-11-28 2020-01-02 3.939 GiB
    SM-T515N_1_20210407125935_gq5xmq85nq_fac.zip
    		Download
    SM-T515N
    SKC South Korea
    		T515NOKR3ASK4T515NKSU3ASK4 2019-11-26 — — — Download

    No matching downloads

    How to flash T515NKSU3ASK4

    • T515NKSU3ASK4 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T515NKSU3ASK4 by region

    Samsung released this build in all regions (2) on the same day, January 2, 2020.

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal25.6 cm (10.1")
    • Display resolution1920 x 1200 pixels
    • Processor frequency1.8 GHz
    • Processor familySamsung Exynos
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution5 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight470 g

    Frequently Asked Questions

    T515NKSU3ASK4 is Android 9 (Pie) firmware for Samsung Galaxy Tab A, released for South Korea (KTC, LUC, SKC). Samsung built it on 2019-11-26.

    No. A newer build for SM-T515N is available: T515NKSU8CVG4. Install it instead of T515NKSU3ASK4 unless you need this exact version. The previous build was T515NKSU2ASI3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab A must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab A running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 3.

    Other builds and changelog for Samsung Galaxy Tab A

    No changelog details available.
    Model firmware by region